CISBO CAR REAR REVERSE PARKING SENSORS AUDIBLE BUZZER CANBUS VERSION KIT VARIOUS COLOURS

 

 UK based 3 YEAR WARRANTY

 

This parking sensor kit has CE certification which is licensed for operation on public roads in EU countries. This kit is designed for both older and newer car models. Modern cars have onboard computers which may cause low voltage problems and this kit fixes those problems. Please see further details below.

 

·         This kit features a simple yet effective package with four sensors, a main unit and a buzzer.

·         Like the parking sensors fitted by manufacturers, this kit will offer a discrete and professional installation.

·         Suitable for cars with and without CANBUS systems. A car with CANBUS (mostly cars made from 2004 onwards) means that the car has an onboard computer. If a non-CANBUS parking sensor kit is fitted to a CANBUS car, the computer in the car detects an extra device connected which then causes the voltage to drop, causing the kit to malfunction. Fitting this kit will eliminate this problem.

32 sensor colours available (please see sensor photo below)

O

·         The warning buzzer sounds in different frequencies depending on the vehicle's distance to an object. Details are shown in the table below:

 

Alarm sound:

Level

Distance (cm)

Area

Sound

1

160 – 200cm

Safe mode

No sound

2

100 – 150cm

Safe mode

Bi------Bi------Bi

3

70 – 90cm

Alarm mode

Bi---Bi---Bi

4

30 – 60cm

Danger mode

Bi-Bi-Bi

5

0 - 30cm

Danger mode

Bi……………

 

 

Main Features:

  • Easy to install
  • Sensor sensitivity adjustment (For example, if the sensors are fitted closer to the ground due to the car having a lower bumper, the sensor sensitivity can be reduced so that the detecting angle reduces)
  • Five different frequencies of alarm sound according to distances.
  • Detachable sensors
  • Waterproof and dustproof sensors
  • CE approved
  • Three year warranty

Kit includes:

  • Four sensors with 2.5 meter cable
  • Four sensor spacers
  • Main unit (100 x 72 x 26mm)
  • Buzzer (51 x 39 x 26mm) with 2 meter cable
  • 60cm power cable. Red wire to reverse light, black wire to ground, yellow wire to ignition (optional, can be connected if the car has a CANBUS system)
  • 21mm Hole Saw - the size of the sensors
  • 3M double sided sticky pads for mounting the main unit and buzzer
  • User manual and installation guide

Technical parameters:

  • Operating voltage DC: 12V
  • Power consumption: max. 65 mA
  • Detection area: 30 to 150cm
  • Operating temperature: -20 to 70 celsius
 For colour coded sensors, please leave a note with the colour code.