Amalgam polishing kits SG1201(RA 0109) Used for low-speed
1. RF 320 2 Black cup-shaped polisher
2. RF 341 2 Black knife wheel polisher
3. RF 313 2 Black pointed polisher
4. RF 320 4 Brown cup-shaped polisher
5. RF 341 4 Brown knife wheel polisher
6. RF 313 4 Brown pointed polisher
7. RF 320 5 Blue cup-shaped polisher
8. RF 341 5 Blue knife wheel polisher
9. RF 313 5 Blue pointed polisher
Followed is the specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
First step: recommended speed:30000-35000; According to different parts,you can choose 1, 2 and 3 different shape polishers for rough polishing the surface.
Second step: recommended speed:30000-35000; According to different parts,you can choose 4, 5 and 6 different shape polishers for fine
Third step: recommended speed:30000-35000; According to different parts,you can choose 7, 8 and 9 different shape polishers for super-fine polishing.
Dental Composite Diamond Polishing Set RA1112
1. For dental clinic low speed bent hand piece.
2. Don’t use the products to sharp part,, or it will damage the abrasive material.
3. Do not need to use with the polishing paste, do not need to apply too much pressure, Touch intermittent natural abrasive
4. Steps :
a. Blue ring white ceramic grinder= 1st step: Removing and contouring. Rec. 10,000-12,000 rpm.
b.Red ring blue silicone polisher= 2nd step: Smoothing and pre-polishing. Rec.10, 000-12,000 rpm.
c.White ring white diamond polisher= 3rd step: High gloss polishing.Rec 7,000-10,000 rpm..
Silicone Rubber Polishers Polishing Burs HP0412 RA 2.35mm Resin Base
1.SK 213 2 Black pointed polisher
2.SK 214 2 Black pointed polisher
3.SK 202 2 Black bullet polisher
4.SK 213 3 Green pointed polisher
5.SK 214 3 Green pointed polisher
6.SK 202 3 Green bullet polisher
7.SK 213 5 Yellow pointed polisher
8.SK 214 5 Yellow pointed polisher
9.SK 202 5 Yellow bullet polisher
Followed is the specific steps. (Note: Each step should be used at the recommended speed.)
1.First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
2.First step: recommended speed:25000; According to different parts,you can choose 1, 2 and 3 different shape polishers for polishing.
3.Second step: recommended speed:15000-25000; According to different parts, you can choose 4,5 and 6 different shape polishers for fine polishing.
4.Third step: recommended speed:10000-20000; According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine polishing. It don't need to re-glaze.
Metal Crown and Steel Base Finishing and Polishing Kits 9Pcs/Set HP0612
3 ceramic polishers , 6 rubber polishers
1.CW 201 4 White pillar polisher
2. CW 213 4 White Cone polisher
3. CW 224 4 White ball polisher
4. RF 212 4 Brown pointed polisher
5. RF 241 4 Brown knife wheel polisher
6. RF 206 4 Brown bullet polisher
7. RF 212 6 White pointed polisher
8. RF 241 6 White knife wheel polisher
9. RF 206 6 White bullet polisher
1.First,adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
2.First step: recommended speed:25000; According to different parts,you can choose 1, 2 and 3 different shape polishers for polishing.
3.Second step: recommended speed:15000-20000; According to different parts,you can choose 4,5 and 6 different shape polishers for fine polishing.
4.Third step: recommended speed:15000-20000; According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine polishing.
Porcelain Teeth Polishing Kit HP0312 Low-speed Handpiece 12 Pcs
1. SH 212 2 *2 White pointed polisher
2. SH 241 2 *2 White knife wheel polisher
3. SH 232 2 *2 White wheel polisher
4. SH 212 3 Pink pointed polisher
5. SH 241 3 Pink knife wheel polisher
6. SH 232 3 Pink wheel polisher
7. SH 212 4 Light Blue pointed polisher
8. SH 241 4 Light Blue knife wheel polisher
9. SH 232 4 Light Blue wheel polisher
1.First,adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
2.First step: recommended speed:25000; According to different parts,you can choose 1, 2 and 3 different shape polishers for polishing.
3.Second step: recommended speed:15000-20000; According to different parts,you can choose 4,5 and 6 different shape polishers for fine polishing.
4.Third step: recommended speed:15000-20000; According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine polishing.