1. For dental clinic low speed bent hand piece.

             2. Don’t use the products to sharp part,, or it will damage the abrasive material.

             3. Do not need to use with the polishing paste, do not need to apply too much pressure, Touch intermittent natural abrasive

             4. Steps    :

              a. Blue ring white ceramic grinder= 1st step: Removing and contouring. Rec. 10,000-12,000 rpm.

              b.Red ring blue silicone polisher= 2nd step: Smoothing and pre-polishing. Rec.10, 000-12,000 rpm.

              c.White ring white diamond polisher= 3rd step: High gloss polishing.Rec 7,000-10,000 rpm..

1.SK 213 2 Black pointed polisher 

2.SK 214 2 Black pointed polisher

3.SK 202 2 Black bullet polisher 

4.SK 213 3 Green pointed polisher

5.SK 214 3 Green pointed polisher

6.SK 202 3 Green bullet polisher

7.SK 213 5 Yellow pointed polisher     

8.SK 214 5 Yellow pointed polisher

9.SK 202 5 Yellow bullet polisher 

Followed is the specific steps. (Note: Each step should be used at the recommended speed.)

1.First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect. 

2.First step: recommended speed:25000; According to different parts,you can choose 1, 2 and 3 different shape polishers for polishing.

3.Second step: recommended speed:15000-25000; According to different parts,  you can choose 4,5 and 6 different shape polishers for fine polishing.

4.Third step: recommended speed:10000-20000; According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine polishing. It don't need to re-glaze.

3 ceramic polishers , 6 rubber polishers

1.CW 201 4 White pillar polisher

2. CW 213 4 White Cone polisher 

3. CW 224 4 White ball polisher

4. RF 212 4 Brown pointed polisher

5. RF 241 4 Brown knife wheel polisher

6. RF 206 4 Brown bullet polisher

7. RF 212 6 White pointed polisher

8. RF 241 6 White knife wheel polisher

9. RF 206 6 White bullet polisher

1.First,adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.

2.First step: recommended speed:25000; According to different parts,you can choose 1, 2 and 3 different shape polishers for polishing. 

3.Second step: recommended speed:15000-20000; According to different parts,you can choose 4,5 and 6 different shape polishers for fine polishing.

4.Third step: recommended speed:15000-20000; According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine polishing.

1. SH 212 2 *2 White pointed polisher

2. SH 241 2 *2 White knife wheel polisher

3. SH 232 2 *2 White wheel polisher

4. SH 212 3 Pink pointed polisher

5. SH 241 3 Pink knife wheel polisher

6. SH 232 3 Pink wheel polisher

7. SH 212 4 Light Blue pointed polisher

8. SH 241 4 Light Blue knife wheel polisher

9. SH 232 4 Light Blue wheel polisher

1.First,adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.

2.First step: recommended speed:25000; According to different parts,you can choose 1, 2 and 3 different shape polishers for polishing. 

3.Second step: recommended speed:15000-20000; According to different parts,you can choose 4,5 and 6 different shape polishers for fine polishing.

4.Third step: recommended speed:15000-20000; According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine polishing.