Engine / Fuel System
Auto Transmission System
ABS Anti-Lock Braking System
SRS - Airbag
EPB - Electronic Park Brake
SAS - Steering Angle Sensor
MIL - Oil / Service Reset
Highlights:
• Read & Clear DTCs
• Read Data Stream
• Full ECU Diagnosis
• Diagnose Single-brand Models Equipped With OBDII-16 DLC
• Easy To Use With Metal Dome Keys
• Oil Light/Service Reset
• EPB
• ETC
• 4.0” TFT LCD With 480 * 320 Pixels
• USB 2.0 High Speed Upgrade
• Upgrade Via TF Card
• Support Multi-language
+ many more (refer to User's Manual)
Features:
• RT II can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc.• Read Data Stream
• Full ECU Diagnosis
• Applies to the entire models of LR equipped with OBDII-16 DLC
• Easy To Use With Metal Dome Keys
• Oil Light/Service Reset:Support service lamp reset, Brake pad reset function, Steering angle sensor calibration etc.
• EPB:Opens and closes the brake pads,Reads and clears EPB/SBC trouble codes,
• Turns off the ECU and brake warning light,Diagnoses EPB/SBC caliper functionality, Resets the brake pad thickness service etc.
• ABS/AIRBAG:Diagnoses ABS/ SRS system codes, Reads/clears codes of ABS/SRS system and turns off ABS/SRS warning light, Performs bi-directional tests such as cycling the ABS solenoids, Retrieves ABS/SRS ECU information etc.
• ETC
• For more functions, please contact us for function list !
OBD2 Functions:
• Read Codes
• Erase Codes
• I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
• Data Stream
• Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
• O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
• On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
• Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
• Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
Specifications:
• Display: 4.0” TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0 ℃ -- 50 ℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current:150mA@12V(Typical)
• Power consumption:1.8W(Typical)
• Dimension:205mm*110mm*31mm(LxWxH)
• Weight:350g
Package Content:
• Main Unit
• Hardcopy User’s Manual
• Main cable
• USB cable
• TF Card
• Nylon carry case
• TF card reader