Note: the size you selected is the outer diameter.
Material: Nitrile (NBR)
Performance: Oil resistant, sealing
Applicable Temperature: 0-100 ℃
Color: Black
Standard: GB123576
Wire Diameter: 1.9mm
Outer Diameter: 5mm, 5.5mm, 5.8mm, 6mm, 6.5mm, 7mm, 7.3mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm, 13.5mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm, 45mm, 46mm, 47mm, 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm, 59mm, 60mm, 62mm, 63mm, 64mm, 65mm, 66mm, 70mm, 75mm, 77mm, 78mm, 80mm, 85mm, 88mm, 90mm, 95mm, 98mm, 100mm, 105mm, 110mm, 120mm, 125mm, 130mm, 135mm, 140mm, 150mm
Applicable Medium:
1. Aliphatic Hydrocarbons (Butane, Propane), Engine Oil, Fuel Oil, Vegetable Oil and Mineral Oil (Except for High Concentration of Acid and Alkali)
2. HFA, HFB, HFC Hydraulic Oil
3. Normal Temperature, Low Concentration of Acid, Alkali and Salt
4. Water
Unsuitable Medium:
1. High Aromatic Hydrocarbon Fuel
2. Aromatic Hydrocarbons (Benzene)
3. Chlorinated Hydrocarbons (Three Chloroethane)
4. Polar Solvents (Ketone, Acetone, Acetic Acid, Ethyl Ether)
5. Strong Acid
6. Ethylene Glycol Base Brake Fluid
Acrylonitrile butadiene rubber is a copolymer of acrylonitrile butadiene and butadiene. It has excellent resistance to petroleum and non-polar solvents, and
has good mechanical properties. The specific properties are mainly determined by the content of acrylonitrile. The content of acrylonitrile content higher
than 50% has strong resistance to mineral oil and fuel oil, but its elasticity and permanent compression deformation become worse at low temperature. Low
acrylonitrile butadiene acrylonitrile rubber has good low temperature resistance, but it reduces oil resistance at high temperature.
Advantages:
1. Good oil resistance, water resistance, resistance to solvent / high pressure oil.
2. Good compressive properties, wear resistance and tensile properties.
3. Rubber parts for making fuel tanks and lubricants.
4. It is used for hydraulic oil, gasoline, water, silicon grease, silicone oil, two ester lubricating oil and glycol system.
5. Rubber parts used in hydraulic fluids and other media
Disadvantages:
1. It is not suitable for polar solvents such as ketones, ozone, nitro hydrocarbons, MEK and chloroform.
2. Intolerance to ozone, weather resistance and heat resistance.