BRAND
NEW AND UNUSED 1.75” Tube (44.45mm OD) 304 Stainless Steel 180 Degree Exhaust
Pipe Mandrel Bend
MATERIAL – 304 Stainless Steel Dull Polished
OUTSIDE DIAMETER – 44.45mm
WALL THICKNESS – 1.5mm
CENTRELINE RADIUS (CLR) – 66.7mm (1.5D)
BEND ANGLE – 180 Degrees
STRAIGHT LEG LENGTH – 100mm minimum
BENDING TECHNIQUE – Mandrel Bent
1.5D CLR Bend
ALL BENDS ARE MADE FROM BRAND NEW, UK BOUGHT STAINLESS STEEL
THIS IS IDEAL FOR AIR INTAKE SYSTEMS, INTERCOOLER PIPES, WATER PIPES, EXHAUST SYSTEMS AND ANY OTHER APPLICATION YOU MAY HAVE.
Why buy
mandrel bends?
Mandrel
bends maintain the same internal diameter all the way through the bend.
Crush
bends are just like they sound; the piping is crushed slightly while bending,
decreasing the ID of the pipe.
Mandrel
bent is the preferred method, but requires special equipment. Virtually all of
your local exhaust shops can only crush bend.
A truly
excellent exhaust can make a big difference to performance. You want to
maintain velocity of the exhaust gases with as little restriction as possible.
The reason is the scavenging effect on your engine. What this means is that
with an excellent system, each exhaust pulse, as it races through the piping,
leaves a slight vacuum behind it to help suck the exhaust out of the next
cylinder when the exhaust valve opens. This helps make your engine more
efficient. You want to pull in all of the air possible, and pump all of the
exhaust fumes out.
As you
introduce restrictions to the exhaust, you begin to reduce the scavenging
effect because you don't maintain the same velocity through the system.
If you have ANY QUESTIONS then PLEASE message us via eBay before buying.
We will be more than happy to answer them!
Please feel free to send any bespoke drawings through to us – we are very experienced in creating custom projects/applications. We can then put up a new item on eBay with an agreed price for that particular job so that you can continue buying in a safe environment.
PRICE GUARANTEE
Tube Bender Limited will not be beaten on price,
whether it’s for one, 10, 100 or 1,000 parts! If you can email us over a quote
you have received or a link to a price you have seen – we can guarantee to beat
it by at least 10%!