Airtec VW Golf R MK7 Uprated FMIC Front Mount Intercooler Upgrade


AIRTEC are proud to introduce the front mount intercooler upgrade for the Golf R.

Designed to fit all models, this freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up.

Featuring a 60mm core design together with high-flow cast end tanks and lower alloy scoop to force air directly to the core, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting and can be used with the original hoses.

As with all AIRTEC products, the intercooler was tested back-to-back on the dyno aginist the OEM item. This showed a huge reduction in air charge temperatures over standard.

Stock intercooler temps reduce to an average of 64 degrees and peak at 68 degrees (after 5 back-to-back runs).

With the AIRTEC intercooler fitted,

huge drop of 120 degrees with AIRTEC intercooler fitted.

Test car fitted with Cobra cat back exhaust & Revo Stage 1 remap.

A peak power increase of 40 BHP due to the standard VW intercooler being inefficient to cope with the extra heat generated for remapped cars and only designed to the standard 300 bhp,=.

With the AIRTEC intercooler fitted this brings the intake temperatures down so much to give a huge increase in performance.

Test results taken @ AMD Rolling road
(Tested on our own demo car, fitted with Cobra cat back).

Before Intercooler was fitted the car made only 336.1bhp & 350.9 lbs/ft

After Intercooler was fitted it made a very impressive 371.8 bhp & 352.9 lbs/ft torque just by adding the Airtec cooler.
Test car fitted with Cobra cat back exhaust & Revo Stage 1 remap.

Temperature in at 156 degrees, a huge drop of 120 degrees with AIRTEC intercooler fitted.

A peak power increase of 40 BHP due to the standard VW intercooler being inefficient to cope with the extra heat generated for remapped cars and only designed to the standard 300 bhp,=.

With the AIRTEC intercooler fitted this brings the intake temperatures down so much to give a huge increase in performance.

Test results taken @ AMD Rolling road
(Tested on our own demo car, fitted with Cobra cat back).

Before Intercooler was fitted the car made only 336.1bhp & 350.9 lbs/ft

After Intercooler was fitted it made a very impressive 371.8 bhp & 352.9 lbs/ft torque just by adding the Airtec cooler.

The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 3-4 hours to complete.

The intercooler is available in a choice of of either Natural Silver or Pro-Series Black finishes, with or without the AIRTEC logo.

Features:

Designed and manufactered in the UK by AIRTEC
AIRTEC logo'd cast end tanks for improved airflow and unbeatable strength
Proven reduction in charge temps
3-year unlimited mileage warranty
Available in either Natural Silver or Pro-Series Black finishes
AIRTEC logo available at no extra charge
Unbeatable value for money!

Approximate Dimensions:

Width: 860mm 
Height: 418mm 
Depth: 60mm

Intercooler finish
Pro Series Black

Airtec Logo:
Black AIRTEC Logo
White AIRTEC Logo
Blue AIRTEC Logo
Red AIRTEC Logo
Yellow AIRTEC Logo
Silver AIRTEC Logo
Orange AIRTEC Logo
Green AIRTEC Logo
Purple AIRTEC Logo
Pink AIRTEC Logo
WITHOUT AIRTEC Logo - Plain


Please note - some items may incur extra shipping charges that have to be sent by courier and are too large / expensive to be sent by Royal Mail (for example headlamps, headunits, speakers, lowering springs etc) to the following postcode areas, Channel Islands, BT, most IV, HS, KA-27-28, KW-15-17, AB30-38, AB44-56, FK17-99, G83, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50, all ZE, IM, and any other non mainland postcodes.