Specifications of the
Antminer D3 are as follows:
a) Hash rate: 17 GH/s (Variation of ±5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmain's APW3 PSU, 93%
efficiency, 25°C ambient temp).
c) Dimensions of the miner: 320*130*190mm
d) Hashing algorithm: X11
Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
Bitmain recommends use of the APW3++ PSU with the
Antminer D3
All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
Separate power supply to control board:
there is one additional 6pin PCIe connector on the IO board which must be
connected to the PSU to get power. Be sure to power on the miner only after all
the PCIE connectors are connected to power supply.