These covers will not fit over the top of standard light switches.

They are for Knightsbridge Grid System ONLY

Flat Plate 1G grid faceplate - brushed chrome

1G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with GDF001F - 1-2G grid mounting frame (sold separately).

Flat Plate 2G grid faceplate - brushed chrome

2G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with GDF001F - 1-2G grid mounting frame (sold separately).

Flat Plate 3G grid faceplate - brushed chrome

3G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with GDF002F - 3-4G grid mounting frame (sold separately).

Flat Plate 4G grid faceplate - brushed chrome

4G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with GDF002F - 3-4G grid mounting frame (sold separately)

Flat Plate 6G grid faceplate - brushed chrome

6G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with 2 x GDF002F - 3-4G grid mounting frame (sold separately).

Flat Plate 8G grid faceplate - brushed chrome

8G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with 2 x GDF002F - 6-8G grid mounting frame (sold separately).

Flat Plate 9G grid faceplate - brushed chrome

9G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with 3 x GDF002F - 3-14G grid mounting frame (sold separately).

Flat Plate 12G grid faceplate - brushed chrome

12G grid faceplate for use with Knightsbridge grid modules. Low profile design and finish coordinates with Knightsbridge Flat Plate Switches & Sockets range. Use in conjunction with 3 x GDF002F - 3-4G grid mounting frame (sold separately).

1-2G grid mounting frame for Flat Plate and Metalclad

Grid mounting frame suitable for use with Flat Plate and Metalclad faceplates

3-4G grid mounting frame for Flat Plate and Metalclad

Grid mounting frame suitable for use with Flate Plate and Metalclad faceplates

1G 35mm Galvanised Steel Box

c/w easy to use 20mm Knockouts

2G 35mm Galvanised Steel Box

c/w easy to use 20mm Knockouts and 4x 25mm knockouts

6-8G 35mm galvanised steel box

35mm deep steel galvanized back box for flush mounting. Suitable for mounting 6-8G grid faceplates and modules. For use with 6-8G grid mounting frames and 6G and 8G faceplates. Flat Plate and Screwless options.

9-12G 35mm galvanized steel box

35mm deep steel galvanized back box for flush mounting. Suitable for mounting 6-8G grid faceplates and modules. For use with 9-12G grid mounting frames and 9G and 12G faceplates. Flat Plate and Screwless options.

20AX 2 way SP grid module - brushed chrome

20AX, 2-way single pole switch. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX DP grid module - brushed chrome

20AX, double pole switch. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX DP module with LED indicator - brushed chrome

20AX, double pole switch with LED indicator. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX 2 way SP module (centre off )- brushed chrome

20AX, single pole switch with centre OFF position (dual circuit control). Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX intermediate module - brushed chrome

20AX, intermediate switch. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX 2 way retractive SP module (marked "PRESS") - brushed chrome

20AX, 2-way, single pole, retractive switch marked “PRESS”. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX 2 way SP key module (marked "EMG LTG TEST") - brushed chrome

20AX, 2-way, single pole, key module marked “EMG LTG TEST”. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX 2 way DP key module (marked "EMG LTG TEST") - brushed chrome

20AX, 2-way, double pole, key module marked “EMG LTG TEST”. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX 2 way SP key module - brushed chrome

20AX, 2-way, single pole, key module. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

20AX 2 way DP key module - brushed chrome

20AX, 2-way, double pole, key module. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

13A fused module - brushed chrome

For appliance protection circuits, supplied with replaceable 13A fuse. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

1G 2-way 10-200W (10-100W LED) trailing edge dimmer module - brushed chrome

2-way switching, rotary dimming, push On/Off, 10-200W rated. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

GLS / Mains voltage halogen/ LV Halogen with dimmable magnetic transformer/ LV Halogen with electronic transformer: Min. 10W ~ Max.200W

LED dimmable lamp /LED dimmable driver : Min. 5W ~ Max. 150W

*To operate with LED lamps, the lamp or driver/control gear must be compatible i.e. dimmable. This unit is not suitable for non-dimmable products.

Please check with lamp manufacturer for compatibility

1G 2-way 10-200W (10-100W LED) trailing edge dimmer (Press Type) - brushed chrome

10-200W rated, press action dimmer, pressing the button dims or brightens the connected lighting. Max. 150W LED. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

Blank grid module - brushed chrome

Blank grid module for unused positions. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

Flex outlet module (up to 10mm) - brushed chrome

Flex outlet module (up to 10mm) - brushed chrome

Spare emergency lighting test key

Spare dedicated emergency lighting test key suitable for use with all Knightsbridge grid key modules.

6A 1G 2-way Dummy Dimmer Module - Brushed Chrome

GDM022BC

Light switch in the outlook of a dimmer. Designed to be used on grid faceplates where you require the outlook of a dimmer but the function of just a switch.

• 6A rated
• 2-way
• Push on/off function

Need to purchase 20AX Switch (for cover to go on) :

Switch Covers - same dimensions as below

Switch cover "marked BOILER" - brushed chrome

Switch cover "marked DISHWASHER" - brushed chrome

Switch cover "marked COOKER HOOD" - brushed chrome

Switch cover "marked TUMBLE DRYER" - brushed chrome

Switch cover "marked FAN" - brushed chrome

Switch cover "marked FRIDGE/FREEZER" - brushed chrome

Switch cover "marked HOB" - brushed chrome

Switch cover "marked MICROWAVE" - brushed chrome

Switch cover "marked OVEN" - brushed chrome

Switch cover "marked WASHING MACHINE" - brushed chrome

Switch cover "marked FRIDGE” - brushed chrome

Switch cover "marked FAN BOOST” - brushed chrome

Switch cover "marked FREEZER” - brushed chrome

Switch cover "marked WARMING DRAWER” - brushed chrome

Switch cover "marked WASTE DISPOSAL” - brushed chrome

Switch cover "marked WINE COOLER” - brushed chrome

Switch cover "marked COFFEE MACHINE” - brushed chrome

Switch cover "marked BLANK - brushed chrome

Pre-printed replaceable/interchangeable rocker covers. Simply remove existing rocker and replace with designation required i.e. Washing Machine, Dishwasher etc.

Green indicator module

Indicator modules can be wired as indicators or locators. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

Red indicator module

Indicator modules can be wired as indicators or locators. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

Orange indicator module

Indicator modules can be wired as indicators or locators. Part of the Knightsbridge Grid system. Module simply clips into position from the front of the mounting frames (sold separately)

1G 2-way 10-200W (10-100W LED) trailing edge dimmer - BRUSHED CHROME

GDM200BC

1G 2-way trailing edge dimmer module for use with the Knightsbridge Screwless or Flat Plate systems.

• 10-200W Incandescent
• 10-100W LED
• 2-way
• Press on/off operation
• Trailing edge dimmer technology
• Certified to EN 60669-2

NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY

WE RECOMMEND A MAXIMUM OF 10-12 LAMPS PER GRID DIMMER TO PREVENT ANY INRUSH CURRENT PROBLEMS

10A Fan Isolator Module - Brushed Chrome

GDM020BC

Single sized grid fan isolator module. Module simply clips into position from front of the mounting frames (sold separately)

• 10A
• Triple Pole
• Engraved FAN ISOLATOR
• For use with the Knightsbridge Grid system

1G 2-way 10-150W (5-100W LED) intelligent dimmer - Brushed Chrome

GDM150IBC

Compatible with leading edge or trailing edge. For use with Knightsbridge grid wiring system (Screwless, Flat Plate, Raised Edge and Metal Clad)

• 10-150W incandescent
• 10-150W mains voltage halogen
• 10-150W LV halogen with electronic transformer
• 5-100W LED dimmable lamp
• 1-way
• Push on/off
• Rotary action dimmer
• Intelligent design switchable from Trailing Edge to Leading Edge
• Overload and Over Temperature protection
• Inrush Current Limiter (ICL)

NB: PLEASE CHECK WITH LAMP MANUFACTURER FOR COMPATIBILITY

WE RECOMMEND A MAXIMUM OF 10-12 LAMPS PER GRID DIMMER TO PREVENT ANY INRUSH CURRENT PROBLEMS

10A Fan Isolator Key Switch Module - Brushed Chrome

GDM021BC

Single sized grid fan isolator module. Module simply clips into position from front of the mounting frames (sold seperately)

• 10A
• Triple Pole
• Key switch operation to prevent unauthorized on/off (key included)
• Engraved FAN ISOLATOR
• For use with the Knightsbridge Grid system

Please ALLOW 2 WORKING DAYS for DELIVERY Thank you