KEYENCE NR2 DEDICATED COMMUNICATION UNIT

w/ SR-510 2D CODE READER, TESTED!



PRODUCT DETAILS:


Model

N-R2

Interface

RS-232C

Code reader power supply

5 VDC ±5% (650 mA)

Terminal block

Input

Number of inputs

2 inputs (IN1 and IN2)

Input type

Bidirectional voltage input

Maximum rating

26.4 VDC

Minimum ON voltage

15 VDC

Maximum OFF current

1 mA

Output

Number of outputs

4 outputs (OUT1 to 4)

Output type

Photo MOS relay output

Rated load

30 VDC, 100 mA

Leakage current when OFF

0.1 mA or less

Residual voltage when ON

1 V or less

Communication specifications

Head port

Number of inputs

1 (12-pin round connector)

Supported communication standards

RS-232C compliant

Communication speed

4800, 9600, 19200, 31250, 38400,57600, 115200 bit/s

Data bit length

7/8 bits

Stop bit length

1/2 bits

Parity check

None/even/odd

Communication specifications

Communication standard

RS-232C compliant

Connector

1 (D-sub 9-pin connector)

Communication specifications

Output interface

Total extension length

15 m or less
(including the head cable)

Rating

Power voltage

24 VDC +10 %, -20 %

Current consumption

380 mA or less

Environmental resistance

Operating environment

No dust or corrosive gas present

Ambient temperature

0 to +50 °C (No freezing)

Storage temperature

-20 to +60 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Weight

Approx. 135 g

......................................................................................................................................................................................................................................................

Model

SR-510

Type

Middle-range

I/O specifications

Trigger/preset input

No-voltage input (with contacts, without contacts) for each input * TTL input is also possible.

Judgment output

Output

4-output (OK, NG, ERROR, and BUSY) NPN open collector

Rated load

24 VDC, 30 mA

Leakage current (at OFF)

0.1mA or less

ON residual voltage

0.8V or less

Serial interface

Communication method

Conforms to EIA RS-232C

Communication speed

9,600, 19,200, 38,400, 57,600, 115,200 bps

Synchronization between the transmitter and receiver

Asynchronous

Data bit length

7 or 8 bits

Stop bit length

1 bit or 2 bits

Parity check

None, odd, even

Laser pointer specifications

Light source

Visible semiconductor laser (655 nm)

Output

600 µW

Pulse duration

200 µs

Reading specifications

Reading distance (typical examples)

Barcode: 60 to 110 mm (narrow bar width: 0.127 mm), 60 to 180 mm (narrow bar width: 0.25 mm), 55 to 250 mm (narrow bar width: 0.5 mm); 2D code: 55 to 125 mm (cell size: 0.25 mm), 60 to 140 mm (cell size: 0.33 mm), 45 to 180 mm (cell size: 0.5 mm)

Reading view range

60.9 × 45.6 mm (distance: 100 mm), 116.3 × 87.2 mm (distance: 200 mm)

Laser pointer specifications

Laser Class

Class 1 (JIS C6802)

Reading specifications

Supported codes

CODE39; ITF; Industrial 2 of 5; COOP 2 of 5; NW-7; CODE128; GS1-128 (EAN-128); CODE93; JAN, EAN, UPC (add-on code support); Trioptic CODE39; GS1 Databar (RSS); QR code; Micro QR; DataMatrix (ECC200); PDF417; MicroPDF; MaxiCode; composite symbol (CC-A, CC-

Minimum resolution

Barcode: 0.127 mm, 2D code: 0.25 mm

Rating

Voltage

5 VDC + 5% to 10%

Current consumption

400 mA or less

Environmental resistance

Enclosure rating

IP65

Ambient light

Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 lux

Operating environment

No dust or corrosive gas present

Ambient temperature

0 to +45 °C

Storage temperature

-10 to +50 °C

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 3 hours in each of the X, Y, and Z directions

Weight

Approx. 274 g (including the cable)

The following components are included in this sale:

1x Keyence N-R2 Dedicated Communication Unit, RS-232C Type

1x Keyence SR-510 Compact 2D Code Reader, Medium Distance Type


Cosmetic Notes:

This assembly is in good used condition with minimal signs of wear including, minor scuffs and scratches on the exterior of the items. These are purely cosmetic, as pictured.

We have more than one of these units in stock so you may not receive the exact unit in the photo. However, they are all in similar cosmetic condition. If you would like to have photos of the exact unit/units that you will be receiving, please send us a request.


Testing & Functional Notes:
This item is Tested & Working, As pictured.  See above for any additional notes.


See Below For Terms & Conditions:

Unless stated otherwise, accessories such as Power Cords, Probes, Software, Batteries, AC Adapters, and/or other Cables etc. are not included.

Payment Methods: 


We reserve the right to restrict payment methods.

5.5 x 5.5 x 2.75", 0.94lbs Made in Japan CabH-I sku6582 av



GENERAL SALES INFORMATION:


  • We guarantee item condition as stated in the Cosmetic & Testing Notes above
  • All sales are final
  • WYSIWYG What you see is what you get, unless otherwise noted. Please review the pictures & description carefully!
  • Unless otherwise noted, the item(s) you are purchasing are sold "as-is, where-is", with all faults and may be used, damaged or may have missing parts &/or accessories.  Seller expressly disclaims any warranty of merchantability, fitness for a particular purpose.
  • What you pay: Item cost + Insured shipping cost (plus any applicable brokerage, taxes etc. - see below)
  • If your feedback is private please do not purchase from us


  • STORE & PAYMENT POLICIES:


  • Our goal is to ensure that our customers are satisfied.  Please contact us to work out any issues rather than leaving negative feedback.
  • The purchaser MUST contact us within 3 Days after the purchasing the item, and Complete Payment within 5 Days from time of purchase. If NOT paid after this time, the transaction will be cancelled and the purchaser will forfeit ALL rights to the item.
  • The Purchaser will receive an email within 2 business days with totals based on the address that eBay provides.
  • We will send you an eBay invoice, and may send a more detailed one through our TorontoSurplus business mail especially for credit card or wire transfer transactions.  Please check your SPAM folder if you don't see it.
  • Please ensure that we receive your correct address, as well as a phone number
  • We ship 3-5 business days after receiving payment (for most items)
  • We accept:
    Visa, MasterCard, PayPal & Wire Transfer

    We reserve the right to limit payment methods
    Do not send credit card information by email!

    SHIPPING POLICY & DETAILS:



    We use experience-proven shipping materials and packaging techniques. Products may be disassembled prior to shipping as appropriate to ensure their safety and minimize shipping costs.





    • Purchaser pays all shipping, and related expenses, unless it says free shipping.
    • Items may be picked up. Just contact us to make arrangements.  Local taxes, and handling (if applicable) will apply.
    • If you receive a damaged package note any evidence of damage on the freight receipt.  Keep the packaging material, and contact us immediately.

    U.S. buyers:

    This applies ONLY IF the purchase price exceeds $800.00 US & it does not ship by Post.
    (contact us before you purchase, and we can tell you how it will ship).
     
  • A flat rate Customs Broker Fee will be added to your invoice, and FCC Fee where applicable.
  • For items not made in the U.S. or Canada: The buyer will be responsible for paying any applicable Duties, Taxes or Fees that U.S. Customs may apply to the item
  • U.S. Customs requires either an EIN# or Federal Tax I.D.# or SSN for the customs paperwork. This information is kept strictly confidential and is used only on the customs documents

  • If you wish to pick-up you may, but you will have to pay our local tax.


    International buyers:
    Will be responsible for paying any Landing Charges, Duties, and Taxes that Customs may apply to the item.


    Canadian buyers:
    Must pay GST or HST, as applicable


    SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>
    SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes> SearchBy<#field ItemNumber/> at <#field storeSection/><#attributes><#field AttrName/> <#field AttrValue/> <#/attributes>