LED 3W Upgrade Bulb for MAGLITE® 5, 6, 7, 8-Cell light 5-30V Replace Krypton

LED Flashlight Lamp PR Bulbs for Standard (5 and 6, 7, 8 -Cell) C, D, AA or 6-Volt lantern Flashlights UP TO 30 VOLTS

Use this LED to upgrade standard 5, 6, 7, 8-cell flashlights to superior brightness, efficiency, and longevity.

STOP: YOUR MAGLITE or Flashlight Must use this type of PR Flange base bulb for the LED upgrade to work.

This 1.0W LED is a GREAT Upgrade bulb made for the 6V, 7.2V, or 9.6V NiCad !

Simply replace your existing bulb with this LED – no modifications necessary!

*Please note, LED bulb will be bright but not as bright as highest power Krypton or Xenon bulb over 10 watts.

The LED will be as bright, efficient, deliver constant brightness with a very long battery run time.

Our LEDs are a bright drop-in replacement that will convert the flashlight to a LED with many satisfied customers.

These LEDs won’t convert your standard flashlight into a 5000-lumen search-n-rescue-light. This would need a new light with multi-LED reflector head with heatsinking.

Direct Replacement for: 5, 6-cell MAG-LITE®'s

5-Cell C/D Cell PR FLANGE BULBES - LWSA501, LMSA501, LMXA501

6-Cell C/D Cell PR FLANGE BULBES - LWSA601, LMSA601, LMXA601

Here is a Bright Option:

Cree 5 Watt XP-G3 P13.5s Upgrade LED for MAGLITE 5, 6, 7, 8 Cell flashlights
352 LUMEN

https://www.ebay.com/itm/233149765933

NOTE: (will not light if used on 2 or 3 cells)

Here is a 5-Watt Cree a Great Option 2-Cell lights or Nicad, NiMh use.

Cree 5-Watt LED Upgrade Bulb for MAGLITE® 2-6 Cell Flashlights Replace Krypton

https://www.ebay.com/itm/231647635036

Here is two of the best options below for 3-Cell Maglite’s:

Cree LED 5W Bulb for MAGLITE® 3-Cell Flashlights 3.6V 4.5V Replace old Krypton
-- This is the Brightest & Best Cree XPG-2 5-Watt LED for Mag-lights ---

Bright 5w, 390 Lumens Brightness 4.5V

https://www.ebay.com/itm/332098833885
· 3.0W- CREE LED 287 Lumens (4.5 Volts) Upgrade PR Bulb for(1 to 6) Cell Flashlight 0.4A 1 - 9V Headlight
https://www.ebay.com/itm/332227325854

--- Super Bright Led's for Less ---

Simply replace your existing bulb with this LED – no modifications necessary!

Works with standard 4 to 8 cell flashlights and tool lights from 5 to 30 Volt
Bright 1w, 250 LUMEN Brightness
Minimizes battery and bulb replacement waste
LED Bulb is Standard Polarity with bottom contact (+) Flange (-)
Focusability of flashlight is preserved with these point source LEDs
Brighter Light for improved vision for enhanced visibility of fine detail
Longer battery life from high efficiency LED
Long lamp life 50,000 hours of continuous use
Dependable and shock resistant
Easy To Install

*MAG-LITE® is a trademark of Mag Instrument, Inc. Draco Products is not affiliated with Mag Instrument, Inc.

Features:

INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.

FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.

LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.

INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.

EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary!

See the difference!

* Increased Brightness and Longer Battery life run time.

Standard PR Incandescent vs. LED 1 Watt


	1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.

	2) Warning! - For safety always follow manufactures safety and operational instructions.

	3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb.

Description:

Upgrade / Replacement for standard flashlight Lamp used in many applications that take a flange base light bulb Important: LED Bulb is Standard Polarity with bottom contact (+) Flange (-)

4 to 6-cell battery operated products (Energizer Zink, Energizer Alkaline, PowerGenix NiZi, Energizer AA lithium, NiCad, and NiMH batteries.

☛ · Buy two now and Save with discounted shipping, the right bulb is hard to find, why not get two

******* This listing is for 1.0 Watt 250 Lumen LED PR Lamp ******************

Also you maybe interested in:

* AA Battery D CELL Adapter Holder 1.5V Cell Converts 1, 2, 3 AA to 1 D Size

https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=331078037178&ssPageName=STRK:MESE:IT#ht_685wt_1124

This is a very popular style (P13.5S) bulb for Many Lanterns, flash lights, and devices that run on FOUR batteries

(NOTE: will not light if used on 2 or 3 cells)

* EPISTAR is a trademark of Epistar Corporation
Draco Products is not affiliated with Epistar Corporation Inc.
Important: LED Bulb is Standard Polarity with bottom contact (+) Flange (-)

*Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list

so purchaser is responsible for compatibility with their actual product.

Thank You.

1-LED Flashlight Lamp, For 4 to 6 "AA" Or "C" Or "D" Size Batteries

The Lamp has a STANDARD 'PR' Base - P13.5s is International standard flanged base, 9.2mm Diameter, with flange "V" notch

★ FEEDBACK: Please return a positive review for good service, We automatically leave positive feedback for all customers. Thank You.

"We provided exemplary customer service and satisfaction guarantee"
© 2015-2021 Draco Products. All Rights Reserved