|
#76 Rick Mancusco Greenwood Corvette 1976
Printed on clear paper for use on a white or light colored car only.
1/64th
HO Scale
Slot Car
Waterslide Decals
Available in 1/18th - 1/24th - 1/32nd - 1/43rd - 1/64th - HO
This decal will not work on a dark color car
This auction is for the decal only, car is not included
TRACKSIDE
The 1976 Spirit of Le Mans
by
Steve Goldin
The
Spirit of Le Mans car is really the former car. It is chassis #007 in the customer car series.
The customer cars are really a whole separate issue. They share a lot of
the same technology and design as the Spirit cars, though. On the
"customer car" series the roll cages extended beyond the front
suspension mounting points to the front of the chassis. Front
suspensions were standard GM A-arm style with springs and shocks mounted
as separate units. Of course, Greenwood always used the Koni
double-adjustable shocks and the needle-bearing bushings. They included
both "trailing arm" conventional leaf spring and "coil-over" (rear-only)
suspensions. Some of the rear "coil-over" cars even have a vestigial
transverse leaf spring to meet specific series rules which required
stock suspension configuration but also allowed supplemental springs.
You'll have to follow that up separately, though.
Getting the
story on the Le Mans car wasn't difficult, really. The ownership trail
was fairly clear and when we were sanding down the panels for
restoration we uncovered most of the earlier colors. Both the "Spirit"
cars had been kept so close to the original configuration that we didn't
really have to figure out very much. In fact I got the original CIBIE
lighting for Le Mans as part of the purchase. We haven't put them on
because they are so delicate.
I got the Le Mans car fromJack
Boxstrom, also around 1992 -'93. He had bought the car from a guy in
Atlanta, George Nuse. The car was drop shipped to Tampa and Jack didn't
really get a chance to do much with it.
">
The
car is chassis #007 and we have the original ID tag to show this. The
car was built for Rick Mancuso, who runs Lake Forest Sports Cars in Lake
Forest (near Chicago), IL. I think it was probably early 1975 when he
bought the car from Greenwood. A lot of the body pieces look like they
came off a 1973 or that era. Rick raced it for a few years and then sold
it to Kerry Hitt, in Pennsylvania. He ran Trans-Am with the car. When he
finished with the car, I think it went to
Paul
Canary (I'm guessing here) but I think he had an investor partner
who wanted to restore the car and sell it. I think it went from there to
George Nuse and then to Jack Boxstrom.
When built the #007
chassis was a basic GM-style frame with coil-over rear suspension and
standard-style front suspension.
There were a couple of
modifications done to the car when
Kerry
Hitt had it. He cut off the front chassis and body. He changed the
front clip (chassis and body) to be able to move the engine further
forward. He kept the original clip and when Paul Canary bought the car,
Paul put it back to original spec. Greenwood looked at it when we were
in Daytona and said that It's an original car. The driver's door still
has the Le Mans running light. Most of the panels are original, although
I think the car also took a pretty good hit at Daytona in 1977 or 1978
going into turn #1 but the restoration work seems to have been very
good. The suspension and other pieces have all been verified by
Greenwood. So we know we have the right car.
About
the only thing that is not original on this car is the dash. John built
the cars with the panels for buttons and switches "under-dash" but Kerry
pulled that out and put in a panel box on the passenger side floor to
keep his knees from hitting them. When we found the Sebring car, the
original dash was all in tact so we saw how it was supposed to be.
The Le Mans car is much wider than the Sebring car and the wings on
back are really tremendous. They work. We also "built-up" the engine a
little on this car while it was being pulled apart.
The story
about how the car got to Le Mans is also pretty interesting. I guess
John Greenwood was about the only car owner ever to be paid to bring his
car to Le Mans. In 1976 there was the fuel crisis and not many cars were
signed-up. This was affecting projected attendance so one of the
organizers, who had helped John in 1973, called him up and solicited
some of that raucous North American iron. John's cars were always a bit
hit with their big blocks and flag motif.
There
are a few interesting stats on the Le Mans car but, unfortunately, there
was not a whole lot of press coverage in the US. Also, because the car
was a late entry, there is not much in the official program about it. I
know that It did a 215.6 down the Le Mans straight. That engine was
another Gary Smith (Carolina Racing Engines) product. It qualified 8th
on the grid but did not finish. The magazines of the day reported that
the car experienced damage to the fuel cell and that caused its
withdrawal from the race.
While the car was being restored by
Mark Cody at Creative Motorsports in Tampa, there was one small incident
that was heart-stopping. Apparently, a storm front just a little weaker
than a hurricane passed through and picked up the front clip (which was
off the car) and moved it to the other side of the shop and then set it
down without a scratch. They only told me about that one much later!
Another interesting story about the restoration is the paint job. We
had to use a model car kit for the race car and copy the decal pattern.
Apparently when the model companies were building their models they
would come and take photos of the car and then make the model from that.
So we just worked backwards to get that specific configuration.
We did take the Le Mans car entirely apart and do a more thorough job of
repairing and restoring things as we put it back together. The
injections systems on this car is original but I am not so sure about
the injection system on the Sebring car.
In conclusion, I plan to
take the cars out and have a good time with them. Some of the vintage
racing is getting pretty intense these days, but I think I can stay cool
enough to avoid crashing. At least that's the plan. I can only run them
in one of the Historic Racing or SVRA series. But both cars are sitting
there ready to go. The only thing I need now is a little help from John
in getting them setup.
|
|
Buyer is responsible for Shipping & handling
costs
I will combine Auctions to save you $$ on
shipping charges if you win multiple auctions or order additional
items.
For Decals the shipping and handling is $2.00 anywhere in the
USA.
If you buy more then 1 decal, you
must wait for me to manually adjust the shipping fees. If you pay before
the adjusted invoice is sent, I will refund any over payment on postage
Free S&H is for USA
customers only |
|
INTERNATIONAL BIDDERS
I will ship anywhere on the globe.
For all addresses outside the USA, shipping &
handling is $3.00 for up to 4 decals and $0.50 for each decal over 4 |
|