|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Porsche Panamera
4 Hatchback 4-Door 3.6L 2011-2013
4S Hatchback 4-Door 4.8L 2010-2013
Base Hatchback 4-Door 3.0L 2012-2013
Base Hatchback 4-Door 3.6L 2011-2013
GTS Hatchback 4-Door 4.8L 2012-2013
S Hatchback 4-Door 3.0L 2012-2013
S Hatchback 4-Door 4.8L 2010-2013
S Hybrid Hatchback 4-Door 3.0L 2012-2013
Turbo Hatchback 4-Door 4.8L 2010-2013
Turbo S Hatchback 4-Door 4.8L 2012-2013
*Generation & Evolution:
Porsche Panamera
970 Chassis G1 First generation (2010-2016)
971 Chassis G2 Second generation (2017-present)
*Platform Drive Layout:
Front Engine-Rear Wheel Drive
The Panamera, S, Hybrid and Diesel models.
Front Engine-Four Wheel Drive
Panamera 4, 4S, and GTS as the Turbo and Turbo S, called Porsche Traction Management (PTM).
*Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set steering to straight ahead.
2.Raise vehicle.
3.Remove applicable front wheel.(picture 1)
4.Remove the upper plastic cover that sits above the air strut.(picture 2)
5.Disconnect the strut connector retaining clip.(picture 3)
6.Disconnect the top electrical plug.(picture 4)
7.Disconnect the air line and remove the air fitting.(picture 5)
8.Loosen and remove the three top shock mounting nuts.(picture 6)
9.Disconnect the wheel speed sensor.(picture 7)
10.Detach the wheel speed sensor wires from their retention brackets.(pictures 8,9,10)
11.Loosen and remove the sway bar end link nut and seperate from the strut.(picture 11)
12.Loosen and remove the bottom mount nut and bolt.(picture 12)
13.Loosen and remove the upper ball joint nut and seperate the ball joint from the spindle assembly.(picture 13)
14.Remove the air strut from the vehicle.
*Installation Guideline:
1.Install the arnott top plate onto the air shock.(pictures 14,15)
2.Install the air shock into the vehicle.(picture 16)
3.Install the bottom mounting bolt and nut and tighten to manufacturer's specifications.(pictures 17,18)
4.Reattach the sway bar end link. Reinstall the sway bar end link nut and tighten to manufacturer's specifications.(picture 19)
5.Reattach the upper ball joint to the spindle assembly. Install the nut and tighten to manufacturer's specifications.(picture 20)
6.Reinstall the top shock mounting nuts and tighten to manufacturer's specifications.(picture 21)
7.Reinstall the air line.(picture 22)
8.Reinstall top electrical plug, being careful to appropriately orient the electrical connection to align the pins.(picture 23)
9.Reinstall the strut connector retaining clip.(picture 24)
10.Reattach the wheel speed sensor wires to the mounting brackets.(pictures 25,26,27)
11.Reconnect the wheel speed sensor.(picture 28)
12.Reinstall the upper plastic cover.(picture 29)
13.Reinstall the wheel.
14.Lower the vehicle.
15.Installation complete.
*Frequently Asked Questions:
How to prevent the damage of air springs/How to extend the service life of air springs/struts etc.?
An air strut with separable air springs
If your vehicle offers a separable air suspension (Audi Allroad A6 C5, Mercedes-Benz W164, BMW X5, etc.), you should regularly (about once a week) lift the car to the maximum position, and remove dirt with a high-pressure cleaner (keep the cleaner at a distance to the air spring about 30 cm/12 inches, otherwise water pressure can damage the air spring). The highest position may vary depending on your model and regulation options. Therefore, please test this by trying the different modes available to you (Sport, comfort, dynamic, off-road) and choose the one that sets your vehicle to the highest position. The dirt will most likely be found under the fold of the pneumatic chambers. If you find a frozen layer of bitumen on the piston guide (the part of a strut on which the air spring is installed), it is recommended to clean it as well. Whenever possible, avoid riding on fresh asphalt, as fresh bitumen mixed with sand immediately results in a build-up of abrasives on the piston and in turn contributes to accelerated wear and tear of the air spring.
A complete air suspension shock
Many cars such as Mercedes W220 or W211 are set up with a complete air strut - shock absorber and air spring visually form a complete spare part. In many cases, you can easily recognize these by the metal cups with which the air spring is tightly mounted. To best avoid any damage, we highly recommend to regularly check the condition of the dust protection seals of the air strut.
What is the difference between an air spring and an air strut?
The air spring is a part of the air strut. Some vehicles (e.g. Mercedes ML) allow you to change the air spring separately. At our online shop you have the opportunity to buy either the whole air strut or only the air spring. For some type of vehicles it is not possible to change the air spring separately. In this case the whole air strut should be replaced.
Which side of my car is the Right and Left?
The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the driver’s side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right.
*OEM Part Number:
97034305107,97034305108,97034305109,
97034305110,97034305111,97034305112,
97034305114,97034305115,97034305116,
97034305117,97034305118,97034305120,
97034305121,97034305122,
97034305207,97034305208,97034305209,
97034305210,97034305211,97034305212,
97034305214,97034305215,97034305216,
97034305217,97034305218,97034305220,
97034305221,97034305222,97034305223
*Item Specifications:
- Key Words: Front Pair Air Suspension Struts For Porsche Panamera 970 Chassis G1 2010-2013
- Package Includes: Pair for Front Left & Right Air Suspension Shock Struts
Notes: Please double confirm the compatibility as well as the OEM number before purchasing.
Instruction is not included. Professional installation is recommended.
*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Porsche Panamera
4 Hatchback 4-Door 3.6L 2011-2013
4S Hatchback 4-Door 4.8L 2010-2013
Base Hatchback 4-Door 3.0L 2012-2013
Base Hatchback 4-Door 3.6L 2011-2013
GTS Hatchback 4-Door 4.8L 2012-2013
S Hatchback 4-Door 3.0L 2012-2013
S Hatchback 4-Door 4.8L 2010-2013
S Hybrid Hatchback 4-Door 3.0L 2012-2013
Turbo Hatchback 4-Door 4.8L 2010-2013
Turbo S Hatchback 4-Door 4.8L 2012-2013
*Generation & Evolution:
Porsche Panamera
970 Chassis G1 First generation (2010-2016)
971 Chassis G2 Second generation (2017-present)
*Platform Drive Layout:
Front Engine-Rear Wheel Drive
The Panamera, S, Hybrid and Diesel models.
Front Engine-Four Wheel Drive
Panamera 4, 4S, and GTS as the Turbo and Turbo S, called Porsche Traction Management (PTM).
*Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set steering to straight ahead.
2.Raise vehicle.
3.Remove applicable front wheel.(picture 1)
4.Remove the upper plastic cover that sits above the air strut.(picture 2)
5.Disconnect the strut connector retaining clip.(picture 3)
6.Disconnect the top electrical plug.(picture 4)
7.Disconnect the air line and remove the air fitting.(picture 5)
8.Loosen and remove the three top shock mounting nuts.(picture 6)
9.Disconnect the wheel speed sensor.(picture 7)
10.Detach the wheel speed sensor wires from their retention brackets.(pictures 8,9,10)
11.Loosen and remove the sway bar end link nut and seperate from the strut.(picture 11)
12.Loosen and remove the bottom mount nut and bolt.(picture 12)
13.Loosen and remove the upper ball joint nut and seperate the ball joint from the spindle assembly.(picture 13)
14.Remove the air strut from the vehicle.
*Installation Guideline:
1.Install the arnott top plate onto the air shock.(pictures 14,15)
2.Install the air shock into the vehicle.(picture 16)
3.Install the bottom mounting bolt and nut and tighten to manufacturer's specifications.(pictures 17,18)
4.Reattach the sway bar end link. Reinstall the sway bar end link nut and tighten to manufacturer's specifications.(picture 19)
5.Reattach the upper ball joint to the spindle assembly. Install the nut and tighten to manufacturer's specifications.(picture 20)
6.Reinstall the top shock mounting nuts and tighten to manufacturer's specifications.(picture 21)
7.Reinstall the air line.(picture 22)
8.Reinstall top electrical plug, being careful to appropriately orient the electrical connection to align the pins.(picture 23)
9.Reinstall the strut connector retaining clip.(picture 24)
10.Reattach the wheel speed sensor wires to the mounting brackets.(pictures 25,26,27)
11.Reconnect the wheel speed sensor.(picture 28)
12.Reinstall the upper plastic cover.(picture 29)
13.Reinstall the wheel.
14.Lower the vehicle.
15.Installation complete.
*Frequently Asked Questions:
How to prevent the damage of air springs/How to extend the service life of air springs/struts etc.?
An air strut with separable air springs
If your vehicle offers a separable air suspension (Audi Allroad A6 C5, Mercedes-Benz W164, BMW X5, etc.), you should regularly (about once a week) lift the car to the maximum position, and remove dirt with a high-pressure cleaner (keep the cleaner at a distance to the air spring about 30 cm/12 inches, otherwise water pressure can damage the air spring). The highest position may vary depending on your model and regulation options. Therefore, please test this by trying the different modes available to you (Sport, comfort, dynamic, off-road) and choose the one that sets your vehicle to the highest position. The dirt will most likely be found under the fold of the pneumatic chambers. If you find a frozen layer of bitumen on the piston guide (the part of a strut on which the air spring is installed), it is recommended to clean it as well. Whenever possible, avoid riding on fresh asphalt, as fresh bitumen mixed with sand immediately results in a build-up of abrasives on the piston and in turn contributes to accelerated wear and tear of the air spring.
A complete air suspension shock
Many cars such as Mercedes W220 or W211 are set up with a complete air strut - shock absorber and air spring visually form a complete spare part. In many cases, you can easily recognize these by the metal cups with which the air spring is tightly mounted. To best avoid any damage, we highly recommend to regularly check the condition of the dust protection seals of the air strut.
What is the difference between an air spring and an air strut?
The air spring is a part of the air strut. Some vehicles (e.g. Mercedes ML) allow you to change the air spring separately. At our online shop you have the opportunity to buy either the whole air strut or only the air spring. For some type of vehicles it is not possible to change the air spring separately. In this case the whole air strut should be replaced.
Which side of my car is the Right and Left?
The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the driver’s side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right.
*OEM Part Number:
97034305107,97034305108,97034305109,
97034305110,97034305111,97034305112,
97034305114,97034305115,97034305116,
97034305117,97034305118,97034305120,
97034305121,97034305122,
97034305207,97034305208,97034305209,
97034305210,97034305211,97034305212,
97034305214,97034305215,97034305216,
97034305217,97034305218,97034305220,
97034305221,97034305222,97034305223
*Item Specifications:
- Key Words: Front Pair Air Suspension Struts For Porsche Panamera 970 Chassis G1 2010-2013
- Package Includes: Pair for Front Left & Right Air Suspension Shock Struts
Notes: Please double confirm the compatibility as well as the OEM number before purchasing.
Instruction is not included. Professional installation is recommended.
| Item Specifics | |
|---|---|
| Placement on Vehicle | Left |
| Type | Air Suspension Strut |
| Fitment Type | Direct Replacement |
| Size | Single Dimension(CM) 73.66(Length)*20.32(Width)*20.32(Height) |
| Single Weight(KG) | 8.880 |
| Maximum Operating Pressure (psi) | 195 |
| Minimum Operating Pressure (psi) | 90 |
| Upper Mount Type | Stud |
| Lower Mount Type | U-Bracket |
| Included Hardware | None |
| Drive Layout | Front Engine RWD & 4WD |
| Platform | 970 |
| Custom Bundle | Yes |
| Material | Iron |
| Quantity | Pair |
| Manufacturer Warranty | 1 Year |
| OE Spec or Performance/Custom | OE Spec |
| Adjustable | Yes |
| Features | Sealed |
| Brand | Scitoo |
| Manufacturer Part Number | CB818571S01 |
| Interchange Part Number | Air Suspension Shock Struts, Air Ride Shock Struts |
| Other Part Number | 97034305207, 97034305208, 97034305209, 97034305210 |
| Superseded Part Number | 97034305107, 97034305108, 97034305109, 97034305110 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
3.Local pick up is not available.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ]
1.We accept multiple payment methods, such as PayPal, VISA, Master Card, etc..
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 7 days as auction ended or order might be delayed.
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ]
Q: How do I pay for my purchase?
A: MY store accepts PayPal, VISA, Master Card, etc..
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]
1. We will leave a feedback once we get your payment.
2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
3. If you are satisfied with the product you received, wish you can leave us a feedback.
Shop Category New List Item
Hot Item
Warranty
|
Front Pair Air Suspension Struts For Porsche Panamera Turbo S GTS 4S 2010-2013
*Compatibility Chart 2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits. 3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Porsche Panamera
*Generation & Evolution:
*Platform Drive Layout: Front Engine-Rear Wheel Drive The Panamera, S, Hybrid and Diesel models.
Front Engine-Four Wheel Drive Panamera 4, 4S, and GTS as the Turbo and Turbo S, called Porsche Traction Management (PTM).
*Removal Guideline: Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence. 1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery. 2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur. 1.Set steering to straight ahead. 2.Raise vehicle. 3.Remove applicable front wheel.(picture 1)
4.Remove the upper plastic cover that sits above the air strut.(picture 2)
5.Disconnect the strut connector retaining clip.(picture 3)
6.Disconnect the top electrical plug.(picture 4)
7.Disconnect the air line and remove the air fitting.(picture 5)
8.Loosen and remove the three top shock mounting nuts.(picture 6)
9.Disconnect the wheel speed sensor.(picture 7)
10.Detach the wheel speed sensor wires from their retention brackets.(pictures 8,9,10)
11.Loosen and remove the sway bar end link nut and seperate from the strut.(picture 11)
12.Loosen and remove the bottom mount nut and bolt.(picture 12)
13.Loosen and remove the upper ball joint nut and seperate the ball joint from the spindle assembly.(picture 13)
14.Remove the air strut from the vehicle.
*Installation Guideline: 1.Install the arnott top plate onto the air shock.(pictures 14,15)
2.Install the air shock into the vehicle.(picture 16)
3.Install the bottom mounting bolt and nut and tighten to manufacturer's specifications.(pictures 17,18)
4.Reattach the sway bar end link. Reinstall the sway bar end link nut and tighten to manufacturer's specifications.(picture 19)
5.Reattach the upper ball joint to the spindle assembly. Install the nut and tighten to manufacturer's specifications.(picture 20)
6.Reinstall the top shock mounting nuts and tighten to manufacturer's specifications.(picture 21)
7.Reinstall the air line.(picture 22)
8.Reinstall top electrical plug, being careful to appropriately orient the electrical connection to align the pins.(picture 23)
9.Reinstall the strut connector retaining clip.(picture 24)
10.Reattach the wheel speed sensor wires to the mounting brackets.(pictures 25,26,27)
11.Reconnect the wheel speed sensor.(picture 28)
12.Reinstall the upper plastic cover.(picture 29)
13.Reinstall the wheel. 14.Lower the vehicle. 15.Installation complete.
*Frequently Asked Questions: A complete air suspension shock
What is the difference between an air spring and an air strut? The air spring is a part of the air strut. Some vehicles (e.g. Mercedes ML) allow you to change the air spring separately. At our online shop you have the opportunity to buy either the whole air strut or only the air spring. For some type of vehicles it is not possible to change the air spring separately. In this case the whole air strut should be replaced.
Which side of my car is the Right and Left? The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the driver’s side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right.
*OEM Part Number: 97034305107,97034305108,97034305109, 97034305207,97034305208,97034305209,
*Item Specifications:
Notes: Please double confirm the compatibility as well as the OEM number before purchasing.
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. 1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order. Payment
1.We accept multiple payment methods, such as PayPal, VISA, Master Card, etc.. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 7 days as auction ended or order might be delayed. Returns
1.All of our brand new items come with a 60-Days money-back guarantee. Customer Services
Q: How do I pay for my purchase? Feedback
1. We will leave a feedback once we get your payment. Copyright of SCITOO-AutoParts . All rights reserved. |
