When ordering from the US, parcels may be subject to import tax and duty charges, which the buyer is responsible to pay.

RC 1000cc Flow Matched Fuel Injectors fit Mazda RX8 GT R3 1.3L NEW Pair

This product data sheet is originally written in English.


Walbro

RC Engineering Direct Warehouse Distributor - All RC Products Available.
Visit our
eBay Store for all other auctions or contact us and we can create a special listing for you!

NEWRC Engineering Flow Matched 1000cc Fuel Injectors IN STOCK!

RC Engineering Flow Matched Fuel Injectors

This auction is for one set of 2 RC Engineering Flow Matched 1000cc Fuel Injectors - RC Part# PL4-1000. These injectors are IN STOCK, on our shelves. You will receive a set of 2 Denso style injectors and spacers/o-rings with flow sheets. You will receive everything you see in the photo, PLUS the RC Engineering flow sheets showing the EXACT flow of YOUR injectors.

Please view the details section below to verify these are the correct injectors for your application.

Wholesale Distribution available, contact us and we can create a special listing for you!


  

Wholesale Distribution available, contact us and we can create a special listing for you!

These 1000cc Low Resistance(Approx. 2.5/3 OHMS) Peak and Hold fuel injectors are flow matched and will fit the following vehicles, but you MUST have your computer setup for Low Resistance:



Each of the two rotors function with 3 dedicated fuel injectors, two primary (designated P1 and P2) and one secondary injector (designated S). Both secondary factory injectors (S) flow 380cc/min. The P1 factory injectors flow 290cc, and the P2 injectors flow 380cc.
Most RX8 owners interested in getting more fuel into their rotary engine replace both secondary injectors with RC Engineering injectors and run the stock 380cc secondary and stock 380cc P2 injectors in the P1 and P2 ports.

RC Engineering fuel injectors are only compatible with the two secondary injector ports on the RX-8.

All RC injectors will require ECU tuning for proper performance.



We have injectors to fit almost every performance application!
Check out our eBay Store or contact us:

Specifications:

Condition: 100% BRAND NEW
Flow Rate in CC per minute: 1000 CC/min @ 43.5 PSI
Flow Rate in LB per hour: 95 LBS/HR @ 43.5 PSI
Resistance: 2.5 ohms
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: Peak 4.0 Amps/ Hold 1.5 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
Part Number: PL4-1000
Spacers/O-rings Included: YES
Warranty: 1 Year Warranty!

RC Fuel Injectors:


RC Engineering Flow Matched Fuel Injectors


  
-IN STOCK ITEMS- Ship no later than the second business day after receiving cleared payment.




Any item paid for with an echeck through PayPal will not ship until the money clears, typically 3-5 business days.
Check at www.ups.com for your location.
-USPS Priority Mail- 1-4 days but no detailed tracking with this service.
-USPS Express Mail- 1-3 days and more detailed tracking than priority.
BUYER BEWARE - NO TRACKING with this service.
-USPS Express Mail- HIGHLY RECOMMENDED 3-5 days typical delivery time with tracking, but as long as 2-3 weeks on rare occasions.
-USPS Global Express Guaranteed- 1-3 days GUARANTEED!
All customs fees are paid by the receiver.
Please research your customs fees with your local government before ordering so you know what to expect to pay once the shipment arrives.
We do not lower invoice values since it is a violation of US and International custom laws.
All international shipments are shipped with the correct value for the parts shipped.
  
Credit card payments can be made by calling

Due to new eBay policies, sellers are no longer allowed to accept any other method of payment for eBay items besides credit card, debit card or paypal.
This means that TREperformance is not allowed to accept other payment methods for any item purchased through eBay.
It is always acceptable to visit our store in person to make payment and pickup your item at:

TREperformance Inc.
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627

  
BUYER REQUIREMENTS TO BID:
1) Buyer must not have a negative feedback with less than 30 positives.
2) Buyer has not left a negative feedback for a seller that has a 97.5% or better feedback rating over the last 12 months or as their total feedback rating.
3) Buyer must pay for all items within 3 business days, or mailed payment must be postmarked within 3 business days.
4) Buyer must read the complete item description and policies in the auction fully and completely.


We reserve the right to cancel your bid and refund your payment if you do not meet these requirements and did not email us using eBay's email system for approval prior to bidding. We also must charge a 25% restocking fee on any order which is cancelled after payment has been received, even if that order has not shipped. This is also to help cover the fees associated with eBay, PayPal, order processing, restocking, etc. If you would like to return or exchange an item please email with your paypal or authorize.net transaction id # and the reason for the return or exchange.
No returns are accepted without an RMA number which is given to the customer by TREperformance via email. Always have the RMA number clearly written on multiple sides of the package when you return the item. If it is not clearly written on multiple sides of the box it may be returned to sender. All returns must be received within 30 days of purchase.

ACCEPTANCE OF TERMS:
Your bid is a contract! By clicking upon "Place Bid" or "Buy It Now" or "Make Offer" the Buyer acknowledges that this action shall be treated as a legally binding "electronic signature," as this term is defined under federal law in the Electronic Signatures in Global and National Commerce Act of 2000. Buyer also acknowledges that he/she has read this web-page, as well as eBay's "Rules for Buyers" in there entirety, and has unconditionally accepted all terms included therein. Buyer also thereby warrants that he/she has any applicable legal authority to purchase this equipment, and that he/she will not use, sell, or otherwise distribute this item in any manner in violation of applicable state and federal laws. Buyer also agrees to indemnify and hold harmless TREperformance for liability from any and all claims arising out of Buyer's use, sale, or other distribution of this item. No refunds will be given unless the buyer receives prior written approval from TREperformance, and no repairs will be provided. Seller reserves the right not to sell to bidders with excessive negative or "0" feedback.
  
Contact info:
Email Anytime: 

TREperformance Inc.
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627

Your bid is a contract! By clicking upon "Place Bid" or "Buy It Now" or "Make Offer" the Buyer acknowledges that this action shall be treated as a legally binding "electronic signature," as this term is defined under federal law in the Electronic Signatures in Global and National Commerce Act of 2000. Buyer also acknowledges that he/she has read this web-page, as well as eBay's "Rules for Buyers" in there entirety, and has unconditionally accepted all terms included therein. Buyer also thereby warrants that he/she has any applicable legal authority to purchase this equipment, and that he/she will not use, sell, or otherwise distribute this item in any manner in violation of applicable state and federal laws. Buyer also agrees to indemnify and hold harmless TREperformance for liability fro
Interchange Part Number PL4-1000D 1000 cc
Placement on Vehicle Front
Brand RC Fuel Injection
Manufacturer Part Number PL4-1000
Part Brand RC Engineering
Manufacturer Warranty Yes
Core Charge None