UK Seller
No Hassle Return Guarantee
Collection Available

Carbon Fibre Epoxy Resin Repair Kit 75G - Small 

 

This carbon Fibre repair kit is suitable for carbon fibre repairs  and small mouldings projects, mouldings . The Epoxy resin is provided with a FAST hardener to give you a decent 30-40 mins of working time. 

 

You will only require approx 50ml of mixed Epoxy to fully use the supplied Carbon Fibre- This will leave extra resin for a further GLOSS coat should you wish.

 

It is ideally suited for carbon fibre repairs such as Car bodywork, fishing poles  kayak and canoe race craft.

 

We include CARBON TAPE ( 220g/Sq M )  - This is 100mm wide and 50cm Length - as this is tape, you get much more stability without the weave becoming mis-aligned.

 

 

What You Get.

 

Epoxy Resin PART A :  50 Grams

Epoxy Hardner PART B : 25 Grams

Carbon Fibre Tape ( 225g/sqM) -  100mm Wide - 50cm Long

Sandpaper Pad  - 150 grit 

Stirring stick

Disposable brush

Instructions

 

 

Recommended extras you may find useful ( These are NOT included ).

 

Sharp scissors or sharp knife  to cut Carbon Fibre tape.

Kitchen scales - To accurately measure the Resin

Mixing pot - washed and clean yogurt pots or similar work well

Masking tape - optional if masking areas 

Heavy duty sandwich bags - can be cut and used to cover a pole repair, also good for masking off areas.

Insulation tape - works really well on poles and best to use sticky side out.

 

 

 

Mixing Ratio : By WEIGHT

2 PARTS RESIN to 1 PART HARDENER.

For example :  for 20g of epoxy resin , add 10g of hardener.

We advise Scales are needed for accurate measuring - Please do not guess this bit.

 

 

We provide instructions based on a basic carbon fibre repair - We highly recommend looking at You tube Vids as a good source of instruction, they will show you the steps involved.  

 

 

SHELF LIFE - 4 Months from Date of purchase.

 

 



Delivery : 


Delivery is by ECONOMY COURIER to all parts of the UK including N.I. Scottish Highlands & Islands, IOW, IOM but sadly NOT Channel islands.


A £2 surcharge is applied for Scottish Highlands, N.I. IOM , Scottish Islands.  This is the actual charge applied by the courier and is not marked up in any way.


We send on working days - Mon to Friday - This does not include weekends or Bank holidays - Same day dispatch cut off is 1200.




Returns: 


We accept returns up until 30 days after date of purchase. Unwanted items must be returned at the buyers cost , we will refund item cost but not postage charges. If any items are damaged , you may be asked to provide photo's of the damage. Our policy is to send replacements to recitfy these issues. Please DO NOT return items without getting in touch first via the ebay message system . We will use the ebay return system to manage returns.




Carbon Fibre Epoxy Resin Repair Kit 75G - Small This carbon Fibre repair kit is suitable for carbon fibre repairs and small mouldings projects, mouldings . The Epoxy resin is provided with a FAST hardener to give you a decent 30-40 mins of working time. You will only require approx 50ml of mixed Epoxy to fully use the supplied Carbon Fibre- This will leave extra resin for a further GLOSS coat should you wish. It is ideally suited for carbon fibre repairs such as Car bodywork, fishing poles kayak and canoe race craft. We include CARBON TAPE ( 220g/Sq M ) - This is 100mm wide and 50cm Length - as this is tape, you get much more stability without the weave becoming mis-aligned. What You Get. Epoxy Resin PART A : 50 Grams Epoxy Hardner PART B : 25 Grams Carbon Fibre Tape ( 225g/sqM) - 100mm Wide - 50cm Long Sandpaper Pad - 150 grit Stirring stick IPA ( alcohol ) pouch for degrease and cleaning Disposable brush Instructions Recommended extras you may find useful ( These are NOT included ). Sharp scissors or sharp knife to cut Carbon Fibre tape. Kitchen scales - To accurately measure the Resin Mixing pot - washed and clean yogurt pots or similar work well Masking tape - optional if masking areas Heavy duty sandwich bags - can be cut and used to cover a pole repair, also good for masking off areas. Insulation tape - works really well on poles and best to use sticky side out. Mixing Ratio : By WEIGHT 2 PARTS RESIN to 1 PART HARDENER. For example : for 20g of epoxy resin , add 10g of hardener. We advise Scales are needed for accurate measuring - Please do not guess this bit. We provide instructions based on a basic carbon fibre repair - We highly recommend looking at You tube Vids as a good source of instruction, they will show you the steps involved. SHELF LIFE - 4 Months from Date of purchase.



Carbon Fibre Epoxy Resin Repair Kit 75G - Small 

 

This carbon Fibre repair kit is suitable for carbon fibre repairs  and small mouldings projects, mouldings . The Epoxy resin is provided with a FAST hardener to give you a decent 30-40 mins of working time. 

 

You will only require approx 50ml of mixed Epoxy to fully use the supplied Carbon Fibre- This will leave extra resin for a further GLOSS coat should you wish.

 

It is ideally suited for carbon fibre repairs such as Car bodywork, fishing poles  kayak and canoe race craft.

 

We include CARBON TAPE ( 220g/Sq M )  - This is 100mm wide and 50cm Length - as this is tape, you get much more stability without the weave becoming mis-aligned.

 

 

What You Get.

 

Epoxy Resin PART A :  50 Grams

Epoxy Hardner PART B : 25 Grams

Carbon Fibre Tape ( 225g/sqM) -  100mm Wide - 50cm Long

Sandpaper Pad  - 150 grit 

Stirring stick

IPA ( alcohol ) pouch for degrease and cleaning

Disposable brush

Instructions

 

 

Recommended extras you may find useful ( These are NOT included ).

 

Sharp scissors or sharp knife  to cut Carbon Fibre tape.

Kitchen scales - To accurately measure the Resin

Mixing pot - washed and clean yogurt pots or similar work well

Masking tape - optional if masking areas 

Heavy duty sandwich bags - can be cut and used to cover a pole repair, also good for masking off areas.

Insulation tape - works really well on poles and best to use sticky side out.

 

 

 

Mixing Ratio : By WEIGHT

2 PARTS RESIN to 1 PART HARDENER.

For example :  for 20g of epoxy resin , add 10g of hardener.

We advise Scales are needed for accurate measuring - Please do not guess this bit.

 

 

We provide instructions based on a basic carbon fibre repair - We highly recommend looking at You tube Vids as a good source of instruction, they will show you the steps involved.  

 

 

SHELF LIFE - 4 Months from Date of purchase.

 

 


Delivery : 


Delivery is by ECONOMY COURIER to all parts of the UK including N.I. Scottish Highlands & Islands, IOW, IOM but sadly NOT Channel islands.


A £2 surcharge is applied for Scottish Highlands, N.I. IOM , Scottish Islands.  This is the actual charge applied by the courier and is not marked up in any way.


We send on working days - Mon to Friday - This does not include weekends or Bank holidays - Same day dispatch cut off is 1200.




Returns: 


We accept returns up until 30 days after date of purchase. Unwanted items must be returned at the buyers cost , we will refund item cost but not postage charges. If any items are damaged , you may be asked to provide photo's of the damage. Our policy is to send replacements to recitfy these issues. Please DO NOT return items without getting in touch first via the ebay message system . We will use the ebay return system to manage returns.