IMPORTANT PRODUCT INFORMATION:
Glassline Paper needs to be kept a minimum of 1/4” from the outside edge of the glass.
If the paper is too close to the edge, the glass will not seal properly and or the paper may crinkle.
A spacer between the sheets of glass is a must. Use 1/8” long pieces of 2mm clear stringer,
placing one each in the very corner of the glass. This works well for pieces 8” x 8” or smaller.
If stringers are not available, a large piece of frit in each corner will work also. For larger sizes
increase the amount of stringer spacers accordingly. For pieces up to 14” x 20” use up to twelve 1/8”
stringers placed along the very edge of the piece. This spacing allows the release of gases before the glass fuses.
If this spacing is not used or the firing is too fast, carbon will be trapped between the layers of glass, causing
4 Anneal the glass like you know from the normal fusing cycles.