Our 1.3-inch OLED expansion board for Raspberry Pi 2B/3B/3B+/Zero/Zero W which features a HAT compatible 40-pin male header, as well as a joystick (5 positions) and three buttons.
It features a blue, 128x64 resolution OLED display driven by an SH1106 chip. It exposes 4 wire SPI, 3 wire SPI and I2C interfaces.
The display interfaces with the Raspberry through the 40-pin HAT interface. The display features a 40-pin male socket and requires for the Raspberry Pi to have a 40 pin male header soldered.
SPECIFICATION
- Driver: SH1106
- Interface: 4-wire SPI, 3-wire SPI, I2C
- Display colour: blue
- Resolution: 128x64
- Operating voltage: 3.3V
INTERFACE
| SYMBOL | Raspberry Pi PIN (BCM) | DESCRIPTION |
|---|---|---|
| KEY1 | P21 | Button 1/GPIO |
| KEY2 | P20 | Button 2/GPIO |
| KEY3 | P16 | Button 3/GPIO |
| Joystick Up | P6 | Joystick Up |
| Joystick Down | P19 | Joystick Down |
| Joystick Left | P5 | Joystick Left |
| Joystick Right | P26 | Joystick Right |
| Joystick Press | P13 | Joystick Press |
| SCLK | P11/SCLK | SPI clock input |
| MOSI | P10/MOSI | SPI data input |
| DC | P24 | Data/Command selection (high for data, low for command) |
| CS | P8/CE0 | Chip selection, low active |
| RST | P25 | Reset, low active |
