THIS POSTING IS FOR ONE ROLL OF 500 FEET OF CABLE. 

WE ALSO SELL LARGER ROLLS. 

SEND ME A MESSAGE IF LARGER ROLLS ARE NEEDED AND I WILL EMAIL YOU A QUOTE.

NEW 500 OR 1000 OR 2500 FOOT ROLLS OF TWO WIRE STRANDED - SHIELDED PROBE AND SENSOR TANK MONITOR CABLE ARE AVAILABLE.

THIS POSTING OFFERS FREE SHIPPING TO THE LOWER 48 UNITED STATES. ALASKA, HAWAII AND PUERTO RICO WILL REQUIRE MORE SHIPPING.

VEEDER-ROOT VERBIAGE - Preferred Wiring Type 

Use #14 - #18 AWG stranded copper, shielded cable (REQUIRED) and manufactured with a material suitable for the environment, such as Carol C2534, Belden 88760, or Belden 88760 Equivalent. Wiring to be installed as a Class 1 circuit with the following provisions: This equivalent cable is exactly the same wire without the high price.

• Wire run must not exceed 1000 feet to meet intrinsic safety requirements,

• Capacitance does not exceed 100 pf/ft,

• Inductance does not exceed 0.2 ìH/ft.

Alternate Wiring Type - When Approved by the Local Authority Having Jurisdiction!

 Use #22 AWG stranded copper, shielded cable (REQUIRED) and manufactured with a material suitable for the environment, such as Belden 88761 or Equivalent. Wiring to be installed as a Class 1 circuit with the following provisions:

• Wire run must not exceed 750 feet to meet intrinsic safety requirements,

• Capacitance does not exceed 100 pF/ft,

• Inductance does not exceed 0.2 ìH/ft.

Splices

Veeder-Root recommends that no splices be made in the wire run between the Probes/Sensors and the Tank Monitor.  Each splice degrades signal strength and could result in poor system performance.

NOTE: IF YOU NEED SMALLER RUNS AND YOU KNOW THE LENGTHS AND HOW MANY WIRES, LET ME KNOW AND I CAN ALSO SELL YOU SHORTER CUTS, OFF OF EXISTING ROLLS, BUT YOU MAY HAVE TO LAY OUT WIRES ON THE GROUND TO PULL THEM. EACH BUNDLE OF WIRES AND SHIPPING WOULD BE QUOTED PER REQUEST.

THANKS FOR LOOKING!!!!!!!