Thermostatic Bath Shower
Mixer & Shower Kit
This riser kit is perfect
for use with a number of our bar and valves and boasts features including easy
clean
shower diverter and auto
lock shower head holder
Square Shower Kit Set
Features:
Length of Rail Kit:
1000mm
Easy clean shower head
nozzles
Auto Lock Sliding Shower
Head Holder
Can be used with both bar
valves and concealed valves and bath shower mixers
Adjustable wall fixing
brackets (Ideal for replacing existing slide rail kit)
Length of shower hose:
1500mm High quality stainless steel
Length of small hose: 900mm
High quality stainless steel
200mm Ultra Thin Stainless
Steel Square Shower Overhead
Generous rainfall drenching
showering experience
1/2" standard fitting - can
be used with any standard shower arm
Ball joint tilts the shower
head
Hand held shower head
diameter: 210mm
Depth of riser kit:
380mm
Tube diameter:
22mm
Square Handset:High Pressure
Boosting Low Bath Shower Head Water Saving Health Filter
Recommend 0.5 bar minimum
for best performance
Working
Requirements
The shower rail kit works on water systems that produce a minimum of 0.2 bar water
pressure.
This can be achieved by
using one of the following systems:
Combination boiler
systems
Gravity fed systems (only
with a pump)
Megaflow
system
Pumped hot water
systems
Standard pressurized hot
water cylinder type systems
Thermostatic Bath Shower
Mixer
This high quality
thermostatic bath shower mixer features a modern design that will complement any
bathroom. Made from solid brass with a chrome finish this thermostatic bath
shower mixer is easy to use and ensures of a safe bathing or showering
experience.
Featuring durable and
dependable ceramic disc technology, this thermostatic bath shower mixer will
supply water, at a pre-set temperature. It also features an anti-scald device
that shuts off the hot water should the cold water supply
fail.
Product
Details
High quality
design
Chrome Plated on Brass Body
Non-return valve
outlets
Deck Mounted On Pillar
Legs
1/2" Bottom outlet for Hose
Connection
Hot & Cold
indicators
Suitable to work at least
0.5 bar required for operation but we recommend 1 bar for best
performance.
Thermostatic bath filler
& shower mixer tap
Centre to centre of inlets
is 180mm for bath mounting
The Thermostatic Cartridge
is solid Brass and NOT plastic like some other similar looking
mixers
The left control knob
controls the water on/off using a 1/4 turn ceramic disc
cartridge
The right control knob is
the temperature control
There is an override stop
button at 38 Celsius degrees
Suitable for all plumbing
systems
Can also be wall mounted
without the legs 150mm centres for pipework through the
wall.
Flow
Rates:
0.1bar: 6
l/min
0.5bar: 8.3
l/min
1bar: 12
l/min
2bar: 18.5
l/min
3bar: 22.5
l/min
Package
Contents
Deck Mounted Bath Shower
Mixer Valve
Deck Mounted
Legs
|