Main industry segments Various industries Applications Power transmission belt Special features Abrasion resistant, Forgiving in case of short term shock like overloads, Robustness, Versatile Product Construction / Design Pulley side material Acrylonitrile-Butadiene-Rubber (NBR) 

Pulley side surface Longitudinal groove structure 

Pulley side color Black Traction layer (material) Polyamide (PA) 

Number of Fabrics 2 Opposite side material Acrylonitrile-Butadiene-Rubber (NBR) 

Opposite side surface Impregnated fabric 

Opposite side color Green 

Product characteristics 

Drive determination  One-sided power transmission

Antistatically equipped Yes 

Adhesive free joining method No Food suitability, 

FDA conformance No Food suitability, 

EU conformance No 

Technical data Thickness of belt 3.4 mm 0.13 inch 

Mass of belt (belt weight) 3.5 kg/m² 0.717 lb/sqft

Tensile force for 1% elongation (k1% after running in) per unit of width (Habasit standard SOP3-013) 12 N/mm 69 lbf/in 

Nominal peripheral force per unit of width 36 N/mm 206 lbf/in Min. operating temperature admissible (continuous) -20 °C -4 °F Max. operating temperature admissible (continuous) 100 °C 212 °F 

Seamless manufacturing width 1200 mm 47.24 inch All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554). 

Joining method Thermofix 

Pulley diameter (minimum) mm/inch 125mm/4.92"

Pulley diameter minimum with counter flection mm/inch 125mm/4.92"

Mode of use or conveyance: Power transmission 

Calculations 

With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended.

For this serves the Habasit SeleCalc calculation program. The easiest way is to have belt drives calculated by Habasit representatives.

Recommendation Observe the indications of the machine handbook from the machine manufacturers 

For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit, Protect belts from sunlight/UV-radiation/dust and dirt. 

Store spare belts in a cool and dry place and if possible in their original packaging. 

This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment