4A 6/12V electronic smart charger 

Fully automatic dual voltage smart charger recommended for a wide range of vehicles up to 2.5L (2500cc)

Suitable for use with 6V & 12V lead-acid and 12V AGM batteries of 1.2Ah to 120Ah

Input : 230V AC 50Hz 0.6A

Outputs: 6V: 4A DC 12V:4A DC

Automatic detection of battery voltage & condition

Automatic charging current selection

4 charging modes : 12V Standard, AGM & Winter; 6V Standard

5 stage charging cycle automatically detects the battery voltage and condition before re-conditioning, charging and maintaining the battery 

Memory function automatically re-starts charging if interrupted

LCD display indicators showing: reverse polarity, faulty connection, faulty battery, battery level, 12V winter charge and 6/12v slow and fast charge 

Interchangeable 1.5m battery clip & ring terminal connector leads included

Overload, reverse-polarity and short circuit protection

Manufactured to European electrical safety standards

Suitable for low maintenance and maintenance-free batteries

IP65

Easy and safe to use 

Compact and robust design

High frequency charger - does not have a transformer 

Not recommended for use with GEL batteries 

Suitable for: motorbikes, cars, vans, caravans and motorhomes 

Box quantities 12

FAQ

1. Do I connect both the round clips to the battery posts or does the "negative" clip have to connect to somewhere on the chassis?

When using the ring terminal connecting lead, the negative lead can be directly connected to the battery post. When fitting this lead to the battery, it should be disconnected from the battery charger and the protective cap should be fitted to the in-line terminals. When connecting to this lead to the charger, the charger should not be connected to the mains. This is to avoid causing sparks near to the battery when making the connection.

2. How long does it take to recharge a flat battery?

An indication of the time required to recharge a flat battery can be calculated by the following formula:

Battery capacity in Ah x 1.25

Charger rated output

The time required by any device to fully charge a battery can be effected by environmental conditions and battery condition.