1-handle creaser kit includes: 1 creaser machine, 1 handle, 1 handle rest, 3 or 5 iron tips.
2-handle creaser kit includes: double-creaser machine, 2 handles , 2 handle rest, 5 iron tips.
After placed order, please send message to specify which iron tips you want. You may choose any 5 iron tips except the polisher. 3 examples are listed below.
Example A: S1, F1.5(1mm), F2.0(1.5mm), F2.5(2.0mm), F3.0(2.5mm)
Example B: S1, F2.0(1.5mm), G2.5mm, GN2.5mm, L4.0mm
Example C: S1, F2.0(1.5mm),Wax Spatula, Edge Polisher, Hole Polisher.
(Mini size irons is not recommended for beginners.)
If you want to buy other number of irons,please send me message and also refer to my store to get more information of iron tips:
================================================
★★★★★ Multifunctional Leather Creaser ★★★★★
================================================
★ Real-time Temperature Control and Display
★ Date and Time Display: month, date, day, time.
★ Auto-Sleep/Awake and Auto-Turn On/Off:
A vibration sensor is integrated in the handle. Based on the vibration detection,
the creaser machine could sleep/awake or turn on/off automatically.
User could set the idle time before the machine goes to sleep or turn off automatically.
★ Common Temperature Remember and Switch:
User could set several frequently-used temperature for leather project, and
Switch between the preset temperatures by clicking or double clicking the shortcut key.
★ Configurable Shortcut Key:
Configure the shortcut key to: turn off; sleep; switch temperature compensations and preset temperatures.
★ Handle with Elegance an Simplicity, Equipped with Heating Unit, Vibration Sensor and Temperature Sensor.
★ Easier to Crease Thanks to Shorter Heating Unit
The exquisite heating unit is much shorter than French-style heating unit,
which makes the iron tip closer to the handle and results in easier and more accurate creasing operation.
=============================
★★ Creaser Machine ★★
=============================
• Input: 100-240V AC
• Output: 24V DC, safe to operate.
• Power: 70W.
• Range: 50 to 400 ℃
You can set the desired temperature at the front panel easily. The thermocouple installed in the heating unit will measure the temperature and shows it in real-time. With a smart PID controll algorithm, the controller will drive the temperature to its target accurately and quickly.
=============================
★★ Creaser Handle ★★
=============================
• Diameter: 2.8 cm
• Length: around 19cm / 7 inch
• Material: Hard wood
• Iron Thread: M5
• Connector: 5 pin
• Operating Volatege: 24V, saft to operate.
=============================
★★ Creaser Iron Tip ★★
=============================
• Full size Iron Tip: F1.5(1mm), F2.0(1.5mm), F2.5(2.0mm), F3.0(2.5mm). $15/each.
FN1, FN2, FN3 and FNR1, FNR2, FNR3. $15/each
S0.5, S1.0, $15/each
• Mini size Iron Tip:
Fmini 1.0mm, Fmini 1.5mm, Fmini 2.0mm, Fmini 2.5mm, Fmini 3.0mm.
G 1.5mm, G 2.0mm, G 2.5mm, G 3.0mm.
GN 2.0mm, GN 2.5mm, GN 3.0mm.
L 2.0mm, L 3.0mm, L4.0mm
(all mini size iron $15/each)
• Special Iron Tip:
Polisher $26/each.
Edge Burnisher (round), Edge Burnisher (Square),
Hole Burnisher 2mm, 3mm and 5mm.
Thread Welder, Wax Spatula (Straight), Wax Spatula (Curved) $15/each.
User may refer to the following link for iron tip details:
https://www.ebay.com/itm/333255403284
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
We are not able to accept returning of HEATED iron tips, because the color of iron tip will change once it is heated and we can't resell it to other customer.
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★