Licence plate holder WHEEL FLUSH YAMAHA MT07 / 2014-2024

The product is developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of fitting the indicators and LED license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5.mm thick steel to stiffen the entire Licence plate holder against vibrations. It is placed on the axle of the swingarm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 millimeter thick aluminum. The functionality of the mudguard is made of 3 millimeter thick aluminum. It is curved to fit your tire and prevents splashing the passenger and driver. The entire product is coated with matte black epoxy paint, resistant to bad weather and stone impacts. The mudguard Licence plate holder allows you to fit all European and International number plates as well as stalk indicators and an approved LED number plate light or tail light. The shutter delivered in the kit is positioned in place of the original Licence plate holder , to prevent any particle infiltration. A 1 meter electrical harness as well as its heat-shrinkable terminals are provided to connect your indicators as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected unplug. For your original indicators, you can mount them by drilling a second hole. The mudguard Licence plate holder adds a futuristic touch. (Turn signals are not delivered)

LICK WHEEL PLATE HOLDER FOR YAMAHA MT07 / 2014-2024

The product is developed to keep the necessary functions for your vehicle, as a mudguard and the possibility of putting the indicators and a plate light LED to European standards (light supplied in the kit). The ultra-reinforced fastening is made of 5 mm thick steel to stiffen the whole plate support against vibrations. It is placed on the axle of the swingarm wheel and takes the place of your aluminum chain tensioning block if needed. The arm part is made of 5 mm thick aluminum. The mudguard feature is made of 3 mm thick aluminum. It is curved to fit your tire and avoids splashing the passenger and the driver. The entire product is coated with a matte black epoxy paint, resistant to weather and stone impact. The FENDER plate holder allows to put all the European and International license plates as well as the rod indicators and an approved LED license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate holder, to avoid any infiltration of particles. A 1 meter electrical harness and its heat-shrinkable lugs are provided to connect your turn signals and the license plate light, you take your original connectors to make the links, it will allow to disconnect it. For your original turn signals, you can mount them by drilling a second hole. The FENDER plate support, brings that futuristic touch (the indicators are not delivered)