Honda VFR750 1994-1997 NEW REAR AXLE FLANGED NUT TITANIUM M35X1.5 R2C10



 

 

 

 

Titanium REAR SWINGARM Axle NUT - Machined with captive 4mmwasher from grade 5 titanium. M35 x 1.5mm (46mm bi - hex Socket Size) Fits many bikes see list below. 50% lighter (79.00 GRAMS) than steel original, Highly resistant to corrosion, and in self colour TItanium, other colours are NOT available.

Additional Information

: Part No.R2C10
: MaterialTitanium Grade 5
: ColourNatural Titanium
: Product TypeNut
: Weight in Gms79.00
: Country of ManufactureUnited Kingdom
Brand NameJAYBEE
: Manufacturer to FitJAYBEEBIKES
: To Fit Size35mm
: Thread Pitch1.5mm
: Max Width55mm
: Socket Size46mm bi hex
: Height21mm
: Pack QuantityIndividual

 

Will fit the following models

 


(M35 x 1.5) axle nut
rear axle nut		  
 

Honda VFR750 FR-FV 1994-1997

 

 Honda part number 90306MZ7000


This aftermarket nut has been machined with a flange so the original steel washer should be discarded. But the original Belleville washer should be retained.
always clean threads and apply copper slip grease before installing.
A 46mm Bi - Hex socket is required to install this nut.
we also sell Titanium nut for opposite side , and the Swing arm pinch bolt in a dual drive flanged head,
please check out my shop, by clicking image below


jaybeebikerbits

 

U.K. POSTAGE FREE

I WILL POST ANY WHERE IN THE WORLD (EXCEPT RUSSIA) 

 ALL ITEMS ARE NOW SHIPPED WITH A SIGNATURE REQUIRED UPON DELIVERY.

 

 

Payments accepted :-

  • PAYPAL World Wide payment

 

 

Items must be paid for in full within 5 working days of auction ending.


Honda VFR750 1994-1997 NEW REAR AXLE FLANGED NUT TITANIUM M35X1.5 R2C10 Titanium REAR SWINGARM Axle NUT - Machined with captive 4mmwasher from grade 5 titanium. M35 x 1.5mm (46mm bi - hex Socket Size) Fits many bikes see list below. 50% lighter (79.00 GRAMS) than steel original, Highly resistant to corrosion, and in self colour TItanium, other colours are NOT available. This aftermarket nut has been machined with a flange so the original steel washer should be discarded. But the original Belleville washer should be retained. always clean threads and apply copper slip grease before installing. we also sell Titanium nut for opposite side , and the Swing arm pinch bolt in a dual drive flanged head,  ALL ITEMS ARE NOW SHIPPED WITH A SIGNATURE REQUIRED UPON DELIVERY. Items must be paid for in