1 Pair Digital Servo Tiny 1.5G Linear Servo for Aircraft Servo & HJ / ESC Tester
Package Included:
- Or 1pair Tiny 1.5g Servo
- Or 1pair Tiny 1.5g Servo + 1 pcs Servo Tester
Specification of 1.5g servo:
Operating Voltage: 4.8-8.4V
4.8V: 0.1kg.f @ 0.2sec / 9mm
6.0V: 0.14kg.f @ 0.15sec / 9mm
7.4V: 0.17kg.f @ 0.12sec / 9mm
8.4V: 0.2kg.f @ 0.11sec / 9mm
Motor Type: Coreless motor(CM)
Stroke: 9mm
Pulse width: 900~2100us
Signal: Digital
Gear Type:Plastic
Bearing: No
Wire length: 100mm
Temperature: -20C°~ +60C°
Size: 21.2 X 15 X 6mm
Net Weight: 1.5g(no including accessory)
JR connector: Red +, black -, orange S
Application:
Helicopter, fixed wing, indoor 3D flight, robot, 3D printer, industrial intelligence
Multifunction Tester Descriptions:
Can be synchronized output control 4 servos and used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes With PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50Hz, rotary potentiometers to decrease or increase the width of the output pulse.
Button the Select (Note: the key switch function, circulation patterns)
1. S-1 manual mode (Manual)
2. S-2-bit mode (Neutral)
3. S-3 automatic mode (Automatic) Keys pulse width:
1. 50H analog servo signal cycle 20us frequency 50Hz
2. 125H digital the steering gear a signal cycle 8us frequency 125Hz
3. 250H Digital Servo signal cycle 4us frequency 250Hz
Multifunction Tester Specifications:
- Brand: HJ
- Material: Plastic
- Color: Blue + black
- Input voltage: DC 5~6V
- Output signal width: 800~2200us
- HJ Digital Servo Tester / ESC Consistency Tester
tester#1 Features:
There are 3 modes to check servos or ESC:
Manual mode: turn the knob with different speed, check the reaction time;
Neutral mode: make the servo go back to the neutral point;
Automatic ''window wiper'' mode: make the servo swing like a window wipers in the biggest angle.
It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.
tester#1 Descriptions:
You can also connect 1-3 ESC to test and compare their reaction time respectively.
It can connect 3 servos of the CCPM helicopters and select servos.
It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.
With LED indicators.
tester#1 Specifications:
- Output: 15mA (5.0)
- Voltage consumption: DC4.8-6V
- Output signal: 1.5ms±0.5ms
- Item Color: Blue
- Size: 48mm*42mm*17mm
- Net Weight: 30g
- Package Weight: 45g
tester#2 Description:
- Output: ≤15mA (5.0)
- Input: DC 4.2-6.0v
- Output signal: 1.5ms ± 0.5ms
- Size: 46 * 32 * 17MM
- Weight: 8g
Adjustment modes: manual, automatic, and the median.
Features: can be easily detected and set the dummy bit server, jitter and median.
Can be connected to two servos or ESC; MCU control, good stability, high accuracy. Turn the knob, steering can be detected.
If you connect the electronic governor (brush or brushless available), you can get rid of the remote control device for manual control, for testing tone
Speed or motor performance is very practical, no longer cumbersome connecting the remote control and the receiver. It is equivalent to a "hand
Dynamic Receiver "feature, playing rudder knob analog transmitters
Note: This tester can test more than 55 grams of servos