24V – 16.5V VOLTAGE CONVERTER 15AMP (24V - 16½V DROPPER)

BRAND NEW 

HIGH SPECIFICATION

MANUFACTURED IN THE UK

SUPPLIED WITH FULL WIRING INSTRUCTIONS

THE BROWN CONTROL LEAD CONNECTION GIVES YOU THE OPTION TO SWITCH THE VOLTAGE CONVERTER ON AND OFF USING A STANDARD LOW CURRENT SWITCH.

ALTERNATIVELY YOU CAN CONNECT THE BROWN CONTROL LEAD DIRECTLY TO THE POSITIVE INPUT, IE: THE +VE CONNECTION ON THE 24V BATTERY (FITTING 1 X INLINE FUSE HOLDER WITH 1A BLADE FUSE BETWEEN THE 24V BATTERY AND THE VOLTAGE CONVERTER AS SHOWN ON WIRING DIAGRAM SUPPLIED WITH UNIT). THE BROWN CONTROL LEAD CONNECTION DETECTS THE VOLTAGE OF THE 24V BATTERY AND WHEN THE BATTERY VOLTAGE FALLS BELOW 19.5V IT WILL AUTOMATICALLY SWITCH THE VOLTAGE CONVERTER OFF UNTIL THE ALTERNATOR HAS REPLENISHED / TOPPED UP THE CRANKING / DONOR BATTERY, AT WHICH POINT THE VOLTAGE CONVERTER WILL BE AUTOMATICALLY SWITCHED BACK ON.

·        PART NO: E1545

·        TYPE: SWITCH MODE STEP DOWN VOLTAGE CONVERTER

·        RATING: 15AMP

·        PEAK OUTPUT CURRENT: > 18AMP (Vin = 24.3V)

·        INPUT VOLTAGE: 20 – 30V DC

·        OUTPUT VOLTAGE: 16.5V DC ± 0.25V

·        CONTROL INPUT VOLTAGE (CVIN): CONVERTER ENABLED:  > 21V DC  / CONVERTER DISABLED: < 19.5V DC

·        CONTROL INPUT CURRENT: <4mA (V control = 30V)

·        OVERLOAD PROTECTION: YES                                 

·        OUTPUT PROTECTED: YES

·        POLARITY PROTECTED: EXTERNAL FUSES

·        OPERATING TEMPERATURE: - 40 DEG.C TO + 70 DEG.C

·        HIGH TEMP PROTECTED: YES

·        SHORT CIRCUIT PROTECTION: YES

·        OVER VOLTAGE PROTECTION: YES

·        EFFICIENCY: > 90%

·       LOAD REGULATION: <0.4V

·       DIMENSIONS: 155mm X 70mm X 53mm

·       FIXING CENTRES: 138mm X 40mm (4 HOLE FIXING)

·       HOLE SIZE: 4.5mm

·       WEIGHT: 447g