Ice Fishing Mount for Wooster Sherlock Pole now available!!! 
https://www.ebay.com/itm/334267790887
---------------------- 1000+ SOLD! Works just like Garmin's factory model. For Garmin's Livescope Transducer LVS32 ONLY ----------------------
I made my design and started selling on eBay March 2020 back when Garmin just announced the feature and didn't even have theirs in stock yet. Tried and True, improved design with hundreds of happy fishermen.
MINI 102° version added to fit 8" hole for ice fishing!!! It can also be used for open water when mounted on a pole. You MUST mount it to the end of the pole so the transducer can clear the pole when rotating. You can't use the ice fishing pole end piece with end sleeve on it either. It won't clear that for rotation.
I use K-Drill 7.5" auger and the MINI 102° version fits in that hole. Sometimes it touches the wall when putting in or pulling out if I didn't clear the ice well. Be sure to keep the walls clear of ice chunks.
A customer has generously provided feedback that mini 102 version worked on his Livescanner perfectly. The regular version's arm is a little bit too long and it wouldn't clear the trolling motor shaft for rotation. It has the same length arm as Garmin's factory version of perspective mount. The mini 102 version's arm is short enough to allow full rotation!
Which angle option do I need?
--- Choose 102° version if your trolling motor shaft mount clamp piece attaches to the transducer is 0°. If you bought Garmin's ice fishing bundle then it came with 0° piece.
--- Choose 94° version if your trolling motor shaft mount is the factory one from Garmin's $1499 system with 8° angle. The 94° plus your 8° adds to 102°. This way you don't have to buy the 0° TM shaft mount.
Package includes:
1x Livescope Perspective Mode Mount BRACKET ONLY (3D printed SOLID one piece design)
1x bolt, 1x lock nut, 2x washer
Works for port side or starboard side install. (It doesn't matter if you are mounting it on your trolling motor shaft or a pole, it doesn't matter if your trolling motor or pole is installed port side or starboard side, it only matters which side you swing this mount. That's what makes it a port side or a starboard side installation.)
Transducer and trolling motor shaft mount not included. They are part of your Garmin Livescope system.
Use the bolt and a lock nut to mount the short end to your TM shaft mount piece. DO NOT over tighten or it will be impossible to rotate.
Your transducer attaches to the longer side of this mount with your existing shoulder bolt and washer.
Made in U.S.A. Ships from Minnesota U.S.A.
Usually ships out the same or next business day.
Check out my CABLE SAVER $18.99 for Livescope Transducer LVS32.
YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
---------------------- 1000+ SOLD! Works just like Garmin's factory model. For Garmin's Livescope Transducer LVS32 ONLY ----------------------
I made my design and started selling on eBay March 2020 back when Garmin just announced the feature and didn't even have theirs in stock yet. Tried and True, improved design with hundreds of happy fishermen.
MINI 102° version added to fit 8" hole for ice fishing!!! It can also be used for open water when mounted on a pole. You MUST mount it to the end of the pole so the transducer can clear the pole when rotating. You can't use the ice fishing pole end piece with end sleeve on it either. It won't clear that for rotation.
I use K-Drill 7.5" auger and the MINI 102° version fits in that hole. Sometimes it touches the wall when putting in or pulling out if I didn't clear the ice well. Be sure to keep the walls clear of ice chunks.
A customer has generously provided feedback that mini 102 version worked on his Livescanner perfectly. The regular version's arm is a little bit too long and it wouldn't clear the trolling motor shaft for rotation. It has the same length arm as Garmin's factory version of perspective mount. The mini 102 version's arm is short enough to allow full rotation!
--- Choose 102° version if your trolling motor shaft mount clamp piece attaches to the transducer is 0°. If you bought Garmin's ice fishing bundle then it came with 0° piece.
--- Choose 94° version if your trolling motor shaft mount is the factory one from Garmin's $1499 system with 8° angle. The 94° plus your 8° adds to 102°. This way you don't have to buy the 0° TM shaft mount.
Package includes:
1x Livescope Perspective Mode Mount BRACKET ONLY (3D printed SOLID one piece design)
1x bolt, 1x lock nut, 2x washer
Works for port side or starboard side install. (It doesn't matter if you are mounting it on your trolling motor shaft or a pole, it doesn't matter if your trolling motor or pole is installed port side or starboard side, it only matters which side you swing this mount. That's what makes it a port side or a starboard side installation.)
Transducer and trolling motor shaft mount not included. They are part of your Garmin Livescope system.
Use the bolt and a lock nut to mount the short end to your TM shaft mount piece. DO NOT over tighten or it will be impossible to rotate.
Your transducer attaches to the longer side of this mount with your existing shoulder bolt and washer.
Made in U.S.A. Ships from Minnesota U.S.A.
Usually ships out the same or next business day.
Check out my CABLE SAVER $18.99 for Livescope Transducer LVS32.
YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window: