ARC SBC20064SC-3/8

 Small Block Chevy Aluminum Cylinder Heads

205cc Intake Port, 64cc Chamber, 2.02/1.6 Valve, Straight Plug

These come with flat guide plates and 3/8" shouldered screw in studs!!!! 

(1 PAIR/ 2 HEADS)   

New pair of KMJ Performance Racing Heads.

These heads are complete and ready to bolt on. 

  • Hardened exhaust seats for unleaded fuel compatibility
  • Bronze valve guides
  • Manufactured with aircraft quality high grade aluminum alloy
  • Multi-angle seat design for improved flow at low lifts
  • Advanced port design for improved flow at all lifts
  • Advanced combustion chamber design allows superb flame travel and burn
  • Additional push rod clearance machined along outside port walls
  • Can use either early or late (Vortec) intakes
  • Can use either perimeter bolt pattern or center bolt valve covers
  • Threaded accessory holes in ends of heads
  • Retains stock 23 degree angle and intake/exhaust bolt locations
  • Thick deck to resist warping and allow for additional milling if desired
  • Does not require offset rocker arms

 These heads will work for all small blocks including 400s (no steam holes). Heads are drilled for both the earlier style intake bolt pattern (pre '87) that had all bolts going in at an angle and the newer Vortec style that has 4 on each side going straight down in. Will not work with stock intake manifolds, must use an aftermarket raised runner intake.

Intake Port Volume

205cc

Combustion Chamber

64cc

Intake Valve Size

2.02"

Exhaust Valve Size

1.60"

Valve Stem Dia.

11/32"

Intake Port Size

2.10" T x 1.18" W

Exhaust Port Size

1.4" T x 1.4" W

Max Spring Dia.

1.625"

Exhaust Crossover

No

Plug

Straight

Weight (per head)

20 lbs.

 

All assembled heads are assembled right here in IOWA in our machine shop and checked by our machinists before leaving! If you have a problem you can call us.

Assembly features:

  • 1.46" diameter dual valve springs, good to .600" lift (flat tappet cams)
  • Stainless steel 1 piece swirl polished valves
  • 10 degree chromoly steel retainers
  • Hardened steel valve locks
  • Flat Guide Plates
  • 3/8" Shouldered Screw-In Studs
  • Springs install @ 1.800 w/135lbs seat pressure
  • Open pressure 335lbs @ 1.25"
  • Coil Bind 1.125"


KMJ PERFORMANCE

- TECH AND RETURNS -

Please use the eBay messaging system for any returns or technical assistance

MONDAY-FRIDAY: 8:00AM-5:00PM   SATURDAYS: 8:00AM-4:30PM (CST)



Click on store image to view our current listings of High Performance Products!



Payment:   We Accept Visa, MasterCard, Discover, and Paypal

Please make payment within 7 days of purchase.  Paypal and Visa/MC/Discover credit card payments are accepted.

Please use the eBay message system if you have any questions or need assistance.

PAYPAL PAYMENTS -

The majority of Paypal payments can be processed within 2-3 hours after received during our normal weekday business times.  To prevent any delays with your order you should watch for the following common issues:

  • Be sure your shipping address has a physical address that Fedex/UPS can deliver to.  Addresses that only have a PO Box can cause long delays and almost always result with having to credit/cancel the order in the end.  You should be able to add one onto your payment when going through the payment process.
  • Be sure the shipping address is correct when making payment.  Shipments will go to the address that comes through on the payment.  Within a short time it may be already shipped and on the way.
  • Some of our listings may request a "note to seller" to let us know if you have a certain preference or need a specific thing such things as sizes, colors, etc.  Putting a note on your Paypal payment is the best way to insure it should not be missed.
  • In order to comply with Paypal's buyer/seller protection policy, any (single) payment having a total of $750 or more must be sent with signature confirmation on delivery.  This applies to all packages that may be associated with the payment.  If the order requires multiple packages someone will need to sign for each one.

If you find there is any problem with your payment or order we recommend calling us during normal business hours if at all possible.  If you miss us during regular hours you can leave a voice mail message on our phone system.  While we do our best to keep up with eBay messages, during times of heavy volume an order can get processed and shipped before we're able to get through them all to stop or change an order. 

Shipping:

Unless a listing is set up that allows calculated shipping for other locations, the shipping amount given for an item will be ground shipping to the lower 48 states only.  We do not offer any next day, air freight, or other expedited services on eBay orders. 

We try and combine EBay auctions when possible. Normally it will be the highest shipping amount plus half the shipping amount on other items, sometimes better on orders of small items. Some items are not combined due to size or weight such as crankshafts, torque converters, radiators, cylinder heads, etc. On multiple item purchases the shipping amount is not figured automatically during checkout so please request a new invoice or wait for us to send a combined invoice so we can adjust the total.

We may have auctions that state free shipping when purchased with certain items. If purchasing items with free shipping, please request a new invoice before paying. The shipping amount is not figured automatically during checkout. We are unable to refund your Paypal once payment has been sent. If you have any doubt what your shipping will be please feel free to message us during business hours.

Powered by SixBit
Powered by SixBit's eCommerce Solution