Dental Diamond Burs Composite Polishing kit for low-speed Contra Angle RA-0309
Feature:
Kit Profile:3 ceramic polishers and 6 silicone rubber polishers
1. CW 306 4 White pointed polisher
2. CW 311 4 White cone polisher
3. CW 351 4 White ball polisher
4. SH 320 3 Pink cup-shaped polisher
5. SH 341 3 Pink knife wheel polisher
6. SH 313 3 Pink pointed polisher
7. SH 320 4 Light blue cup-shaped polisher
8. SH 341 4 Light blue knife wheel polisher
9. SH 313 4 Light blue pointed polisher
Followed is the specific steps. (Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
First step: recommended speed:15000-20000; According to different parts,you can choose 1, 2 and 3 different shape polishers for rough polishing the surface.
Second step: recommended speed:15000; According to different parts,you can choose 4, 5 and 6 different shape polishers for fine polishing.
Third step: recommended speed:15000; According to different parts,you can choose 7, 8 and 9 different shape polishers for super-fine polishing.
***********************************************
Dental composite polishing diamond system RA disc 14mm wheel
Description:
Dental rotary grinding and polishing instruments
(1. Smoothing. 2. Pre-polishing. 3.High-gloss polishing)
2.Best results, high efficiency
3.Applicable on composite,ceramic and Zircon
4.Recommend speed:7,000-12,000 rpm/min
Package:
6pcs/set
*****************************************
1Box/100pcs Dental Colorful Nylon Bowl Polishing Polisher Prophy Brushes flat type
Features:
Latch Type (RA)
Used for stain removal and polishing
Prepares surface for sealant and orthodontic procedures
100 brushes per box
Material: Colorful Nylon
Flat Type
Single use
For professional dental application only
Hard plastic storage box included
************************************************
Feature:
This can be autoclavable,suitable for disinfection of high temperature at 135 ℃ without package box, conform to modern clinical requirement.
Model: RA 0304
Package:4pcs/kit
Net weight:25.5g
Size: 7*4.1*2.3cm
Material: silicone polishers
Used for Composite
Used for Handpiece type: low-speed contra handpiece
Includes:
2pcs white silicone polishers:SH3132, SH3202
2pcs blue silicone polishers:SH3134, SH3204
Usage:
Soft silicone polishers for porcelain
Instructions:
1. For dental clinic low speed bent hand piece.
2. Don’t use the products to sharp part, or it will damage the abrasive material.
3. Do not need to use with the polishing paste, do not need to apply too much pressure, Touch intermittent natural abrasive
Followed is the specific steps.
(Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
1. White silicone polishers = 1st step: Smoothing and pre-polishing. Rec. 10,000-15,000 rpm/min.
2. Blue silicone polisher = 2nd step: High gloss polishing. Rec.10, 000-12,000 rpm/min.
+++++++++++++++++++
Description:
Finishing and polishing of all composite restorations
Polishing of enamel after scaling
Removing excess cement after Orthodontic debanding
Removing surface stain without damaging the enamel
Finish for all types of composite restorations, simply by altering the contact pressure
Specially made for finishing and polishing of direct restorations
Technical:
Material:Silicone with Aluminium oxide
Recommended speed:7,000-10,000 rpm/min
Available in three different shapes
Size:6*11mm、6*10mm、10*7mm
Mandrel diameter:CA 2.35MM
134°C Autoclavable
Package:
Polisher:20pcs
Mandrel*1