TCR1000D Non-contact Phase Sequence Detector
Product Main Function
1. Phase sequence detection (positive phase, anti-phase, default phase), live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search, DC line breakpoint detection, line maintenance.
2. Phase Sequence State: dynamic acousto-optic indication
3. Line voltage: 70~1000V
4. Clamp wire diameter: Φ10mm~Φ40mm
ETCR1000D Non-contact Phase Sequence Detector with non-contact phase sequence detection, live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search and other functions, can clamp the wire with outer diameter Φ1.6mm~Φ16mm, When using, the insulation clamp can be directly clamped on the insulation skin of the live wire to test, no need to stripping off the wire or touching the exposed live wire of high voltage. The measurement result is dynamic display of LED, which is very clearness and directness, improves the safety and convenience of the test, and practically protects the personal safety of the operators.
The bottom plate of the instrument is equipped with magnets, the instrument can be attached to the metal shell of the equipment in the test, which makes the operation more convenient. The three clamps adopt 3 colors of the out shell, which is more in line with the distinction of three-phase line and the national standard (GB681).
Power Supply
|
AA batteries (LR6) ×2 PCS(Battery does not include)
|
CT Jaw Size
|
Can clamp and test wire diameter Φ10mm~Φ40mm
|
LCD Size
|
None
|
Detect Voltage Range
|
AC70~1000V
|
Auto Shut Down
|
After 5 minutes, the meter auto shut down without any operation
|
Working Temperature
|
-10~50℃; below 80%rh
|
Store Temperature
|
-20~60℃; below 90%rh
|
LED Display
|
【Positive phase sequence】The four phase detector lamp lights up clockwise
|
【Negative phase sequence】The four phase detector lamp lights up counterclockwise
|
【live-voltage indication】 L1, L2, L3 lamps light up in setting voltage range
|
【Default phase】 L1 or L2, or L3 lamp is not lighting
|
【Open circuit】 L1 or L2, or L3 lamp is not lighting
|
Beep Indication
|
【Positive phase sequence】the meter make short beep sound intermittently
|
【Negative phase sequence】the meter make long beep sound continuous
|
Battery Check
|
The POWER indication lamp light up after boot up; the LOW BATTERY lamp light up when low battery
|
Magnet
|
4pcs magnets are installed on the bottom plate of the instrument, which can be attached to the distribution box and load weight 800g
|
Clamp Lead Length
|
0.6m
|
Maximum Measurement Voltage
|
AC1000V
|
Insulation Strength
|
5.4kVrms
|
Maximum Rated Power
|
300mVA
|
Suitable Safety Standard
|
EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT Ⅲ(600V)
|
Meter Weight
|
200g (with battery)
|
Meter Dimension
|
70mm×75mm×30mm
|
Package
|
Outer Package
|
Carton
|
Inner Package
|
Cloth bag
|
Accessory
|
Meter
|
1pcs
|
Cloth bag
|
1pcs
|
Manual
|
1pcs
|
Certificate
|
1pcs
|
Warranty Card
|
1pcs
|