My 3d printed WillTravel camera design in 8x10 - shown in 180mm focal length. Other focal lengths available, see below and ask me.

Please read the entire description.

The WillTravel camera design is a fixed focal length on the groundglass manually focused or zone focused lightweight camera design. The camera design is symmetrical allowing for both left and right hand use. Integrated into the camera body is 2 x 3 coldshoe mounts for accessories like rangefinder, viewfinder etc. The camera body has 3 metal 1/4-20 tripod adapters and 3 bubble spirit levels. The camera back allows for the Toyo, Fidelity and Lisco standard 8x10 double sided filmholders which slides in under the groundglass.

Focusing is done by rotating the frontcap to desired distance or using the groundglass for correct focus composition. Instruction on how to set up the zone focus scale is provided.  Frontcap pitch is set so that one turn focuses from infinity and to a few meters. 

Shown lens is the Fujinon 180mm W f5.6 (old design with inside letters which covers 8x10), the design will accommodate any lenses which covers 8x10 of focal lengths 115, 120, 121, 165, 180, 210, 240, 250 and 300mm .  I have tested successfully with the Super Angulon 121mm f8, and not so successfully with Super Angulon 90mm f5.6 (no coverage in the corners) , although rumor has that it will cover when focused at hyper focal distance and not infinity. Both the 121mm and 180mm camera with lens weighs in below 2 kg!


In order to prepare your camera, I need to know the lens you are planning you use it with. This to tailor the height of the frontcap to the lens Flange Focal Distance (FFD). Please ask. 
  
I have camera design in the following configurations:
  • 8x10 -  90 (see note above), 115, 121, 150, 180, 210, 240, 250  and 300mm. Other focal lengths on request.
  • 4x10 -  90 (see note above), 120/121 and 180mm. (See separate listing)
  • 4x5  -  47, 58, 65, 75, 90, 105, 110, 120, 135, 150 and 180mm. (See separate listing)
  • 5x7 - 72, 75, 90, 110, 120/121, 135, 150 and 180mm. (See separate listing)

What you get is:
  • WillTravel 8x10 - (your focal length) mm camera including;
  • Groundglass frame with acrylic ground glass.
  • Custom FrontCap and internal funnel for your lens. 
  • Grip and bungee cord according to your preference of either black (default), red or orange.

Note regarding the supplied acrylic groundglass, this is not as bright and easy to focus on as real glass groundglass, however it´s lightweight and will withstand more rough handling than real glass. In line with the WillTravel camera design philosophy.  However if you want to upgrade to having a alternative real glass groundglass, let me know. I can the provide you with a 3d printed groundglass frame ready for a groundglass sources from ebay or DIY for a nominal cost together with the camera. 


You need to have the skillset and tools to mount the lens to the camera, this is similar to mounting it on a lensboard. And you also need to mount a internal stopper with 3 M3 screws to ensure that your lens stays on the camera during use.  Full online instructions are provided.

Need an affordable 3d printed Viewfinder? See my other items for sale.
Do you want to use a M65 Helicoid to focus? Ask me.

The camera parts is printed in PETG.  Camera body is painted with flat black paint internally. 
Color of hand grip and bungeecord based on availability. Currently black, red and orange is available. Please specify any color preference.  

Also note that its a 3d printed camera, thus it will be fully functional but might have minor surface "defects" / artifacts from the production process. 


Buyer are responsible for all customs and VAT fees. European buyers, Norway is not part of the EU inner market, thus you should expect to pay VAT and any applicable fee.


Shipping is for tracked and signed for shipment world wide, similar to EMS. 

NB; Lens, filmholders and tripod shown for illustration only, and thus not included :-)