Anniversary Speed Graphic 4x4" 101.4x101.4mm Lens Board All Sizes Copal, Compur, Ilex

This is a High quality 3D Printed Lens Board available in all sizes. The lens board is light-tight and has bees tested on a camera. The material used is PETG, one of the strongest 3D printing material with high temperature and mechanical resistance. I especially use only HIGH QUALITY filament made it Italy. This material is NOT biodegradable and will last a lifetime with a normal use. There are small imperfection do to the 3d printing process but this is one of the highest print quality available. All my items are painted with opaque black to prevent any light passing through. 

Material: PETG plastic

Temperature resistance: 80°C

I always work to improve the quality of my items, the design of  lens board you'll receive may vary slightly from what you see in the pictures. 

Special Design With reinforcement for better stiffness

This lens board is suitable for Anniversary Speed Graphic 4x5 camera

Send me a message for custom hole sizes before placing the order

You will receive:

1x lens board 

Brand	# Size	Hole Size - mm	Hole Size - Inches	Nearest fractional size	Comments, lenses
Compur	#00	26.3mm
	#0	34.6mm	1.362"	1 3/8" = 1.375"
	#1	41.6mm	1.638"	1 5/8" = 1.625
	#2	52.5mm			oddball
	#3	65mm	2.559"	2 1/2"
Copal	#0	34.6mm	1.362"	1 3/8" = 1.375"
	#1	41.6mm	1.638"	1 5/8" = 1.625
	#3	65mm	2.559"	2 1/2"
Ilex	#3	50.42mm	1.985"	1 7/8" = 1.875"	Kodak 10" Comm Ektar f/6.3
	#3 dial set		1.985"
	#4	66.14mm	2.604"	2 5/8" = 2.625"	Kodak 12" Comm Ektar f/6.3
	#4 dial set		2.604"
	#5	85.47mm	3.365"	3 3/8" = 3.375"	Kodak 14" Comm Ektar f/6.3
Prontor	#0	34.6mm
	#1	41.6mm
	#3	65mm

The camera is for demonstration only. 

Check my shop for more large format photography items

Feel free to contact me for any question