•  
  • Cold light drive also has several advantages as follows:
  • (1) energy-saving. Its low power consumption, the decline in the total input power of the lamp line, better energy-saving effect.
  • (2) the elimination of the strobe light-emitting more stable. It will help improve visual resolution, improve efficacy;reduce visual fatigue of continuous operation, help protect eyesight.
  • (3) The starting point is more reliable. Once the starting point for success.
  • (4) stable input power and output luminous flux: high quality products, good voltage regulation, power,voltage deviation is large, the light source constant power to maintain stable illumination conducive to energy conservation.
  • 79" RED LED Car Interior Decorative Atmosphere Wire Strip Light Lamp Accessories

     

    Cold light drive also has several advantages as follows:

    (1) energy-saving. Its low power consumption, the decline in the total input power of the lamp line, better energy-saving effect.

    (2) the elimination of the strobe light-emitting more stable. It will help improve visual resolution, improve efficacy;reduce visual fatigue of continuous operation, help protect eyesight.

    (3) The starting point is more reliable. Once the starting point for success.

    (4) stable input power and output luminous flux: high quality products, good voltage regulation, power,voltage deviation is large, the light source constant power to maintain stable illumination conducive to energy conservation.

    (5) to extend the life of the lamp wire. The decline in high-quality products,constant power and lights line current, and reliable starting point lights line can prolong life.

    Instructions for use:

    1 cold light must be connected with the drive to use, and can not be connected directly to the power supply.

    Cold light can use double-sided tape or glue fixed and then the car.

    Cold light can cut use, cut the part can be discarded, ownership length does not affect the use of the remaining part of the.

    Tips: cold light requires the player Little headlight alignment,

    alignment know nothing of the lights have the players, the shop recommended repurchase went to the master installation.

    Product Overview:

    Product quality and longer life

    More suitable for automotive use, flat round, the greater the force, not easy to fall off

    Special quasi-cold light emitting principle and power consumption is small, so only specific power drive to run properly!

    LED Type:Cold LED Light Strip

    Color: Red

    Size: Length:200cm

    Width:0.6cm

    Voltage:12V DC

    With 6mm Broadside(You need to intall the Broadside into the gap of car interior trim panel)

    Direct inserted in cigarette lighter

    Fit all auto with 12V DC

    Package includes

    1 x 200cm Cold Light Strip

    1 x Power Driver


    Item Specifics
    Brand AUXITO
    Manufacturer Part Number LGX-Red-EAK
    SIZE 200CM IN LENGTH
    Warranty 1 Year
    Type LED
    Number of Bulbs 2

    Payment
    • We only accept PayPal payment, should be received within 3 days from the date of purchase.
    • Please keep the consistency of Paypal address and ebay address.
    • Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .
    • Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase
    Shipping

    All items will be shipped in 48 hours after receiving your payment.

    Returns
    We offer a 30 day return policy. If you have any questions about the product or want to return it, please contact us within 30 days after receiving the order. The return will be sent after we get your return package.
     
    All returned items should be in the original packaging, and return tracking information should be provided..
     
    The buyer is responsible for the transportation cost of the returned goods, because the problem is not caused by the quality of the project itself.
    Contact Us

    Our office hours are MONDAY-FRIDAY 9:00PM-6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend.

    FAQ
    FAQ
     
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LEDs are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    -if your light turns on, please proceed to install both bulbs onto your vehicle.
    -if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Shop Category
    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    79" RED LED Car Interior Decorative Atmosphere Wire Strip Light Lamp Accessories

     

    Cold light drive also has several advantages as follows:

    (1) energy-saving. Its low power consumption, the decline in the total input power of the lamp line, better energy-saving effect.

    (2) the elimination of the strobe light-emitting more stable. It will help improve visual resolution, improve efficacy;reduce visual fatigue of continuous operation, help protect eyesight.

    (3) The starting point is more reliable. Once the starting point for success.

    (4) stable input power and output luminous flux: high quality products, good voltage regulation, power,voltage deviation is large, the light source constant power to maintain stable illumination conducive to energy conservation.

    (5) to extend the life of the lamp wire. The decline in high-quality products,constant power and lights line current, and reliable starting point lights line can prolong life.

    Instructions for use:

    1 cold light must be connected with the drive to use, and can not be connected directly to the power supply.

    Cold light can use double-sided tape or glue fixed and then the car.

    Cold light can cut use, cut the part can be discarded, ownership length does not affect the use of the remaining part of the.

    Tips: cold light requires the player Little headlight alignment,

    alignment know nothing of the lights have the players, the shop recommended repurchase went to the master installation.

    Product Overview:

    Product quality and longer life

    More suitable for automotive use, flat round, the greater the force, not easy to fall off

    Special quasi-cold light emitting principle and power consumption is small, so only specific power drive to run properly!

    LED Type:Cold LED Light Strip

    Color: Red

    Size: Length:200cm

    Width:0.6cm

    Voltage:12V DC

    With 6mm Broadside(You need to intall the Broadside into the gap of car interior trim panel)

    Direct inserted in cigarette lighter

    Fit all auto with 12V DC

    Package includes

    1 x 200cm Cold Light Strip

    1 x Power Driver


    • We only accept PayPal payment, should be received within 3 days from the date of purchase.
    • Please keep the consistency of Paypal address and ebay address.
    • Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .
    • Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase

    All items will be shipped in 48 hours after receiving your payment.

    We offer a 30 day return policy. If you have any questions about the product or want to return it, please contact us within 30 days after receiving the order. The return will be sent after we get your return package.
     
    All returned items should be in the original packaging, and return tracking information should be provided..
     
    The buyer is responsible for the transportation cost of the returned goods, because the problem is not caused by the quality of the project itself.

    Our office hours are MONDAY-FRIDAY 9:00PM-6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend.

    FAQ
     
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LEDs are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    -if your light turns on, please proceed to install both bulbs onto your vehicle.
    -if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    All rights reserved.



    On May-09-22 at 19:57:05 PDT, seller added the following information:

    DataCaciques