About

Intended for any production year of the Yamaha TW200 Motorcycle

Allows user to expand electrical system by providing a 1.13" (28.7mm) mounting space for an auxiliary power source outlet and/or instrument indicator. Common uses include but are not limited to:

-USB Charging Outlet
-Voltmeter
-12v Cigarette Lighter

Mount shown in ad photos with a "12-24V QC3.0 Dual USB Car Charger Fast USB Socket Outlet + Blue LED Volt Meter" sold by a different online seller. Many different types and brands of outlets utilize the same size space. (See mounting dimensions below)

No USB/Voltmeter Outlet will be sold with any of these mounts. Photos showing installed outlet are for demonstration purposes only. You must purchase the outlet/device you plan to install separately.

(see mounting dimensions below)

Trail Tested in Moab, UT

This 3D printed mount is designed to mount around the OEM Turn-signal/Neutral/High-beam light housing using the two factory screws. It also uses a strip(s) of 3M double-sided automotive-grade tape to secure it to the housing to ensure there is no rattling.


Buyers Guide

These mounts are available in Carbon-fiber Reinforced Polycarbonate materials. They are suitable for off-road and street use.

Carbon-Fiber Reinforced Polycarbonate is resilient and has a strength rating of 72MPa. It only comes in matte black. Polycarbonate mounts are guaranteed for life with replacements only costing the amount for postage ($4)

Rocker-Switches are sold extra (option when placing order). They are priced at +$2.00 per switch. If "No switches" is selected then your mount will ship without any switches.

No USB/Voltmeter Outlet Will Be Sold With Any of These Mounts Photos showing the installed outlet are for demonstration purposes only. You must purchase the outlet/device you plan to install separately.

Mounting Dimensions for the outlet mounting hole are as follows:

-Inner Diameter of outlet mounting hole: 1.13" (28.7mm) Be sure you ensure your intended outlet will be no larger than this size. Slightly smaller will still work with use of shims and/or adhesives. Do not use an outlet smaller than .95" (24mm).

-Depth of outlet mounting hole: .83" (21mm) It is best to choose an outlet with mounting threads which utilize a large mounting nut to fasten on the backside of the mount. Screws must extend past 21mm to make use of a mounting nut. If the outlet you intend to use is shorter than 21mm or does not have mounting threads/nut then you will most likely need to use some form of adhesive to install.

-Fitment may be difficult or impossible with some aftermarket TW200 parts, such as a windshield. No returns accepted, so please take this into consideration.

You can paint your mount by first lightly sanding, cleaning and using a plastic adhesion promoter. For a perfectly smooth finish, spray with a high-build primer and sand with 400 grit sandpaper. Then clean and paint any color. 

Includes

-1 Mount
-3M double-sided automotive-grade tape (Pre-Installed)
-Switches (If additionally purchased, otherwise mount ships without switches)

Warranty

-Every mount has a 3-month craftmanship warranty with free replacement. For a replacement you must send clear pictures of the broken part.

-Polycarbonate mounts are guaranteed for life with replacements only costing the amount for postage ($4). For a replacement you must send clear pictures of the broken part.

-There is no warranty on the switches

Contact

If you have any questions or need any modifications made for your mount send me a message on eBay. For any replacement parts send me a message via eBay.