Stainless Steel Towel Rail Radiator Polished Bathroom Heater Lifetime Guarantee

HIGH QUALITY! Stainless Steel Bathroom Ladder Heated Towel Rails

Our Polished Stainless Steel Heated Towel Rail are a functional heating solution for a variety of roomsets and installations. 
We have a wide range of sizes varying in width (350mm up to 1200mm) and height (400mm up to 1600mm)

Our polished stainless steel ladder rails are ideal for both:
- drying towels or clothing.
- providing an efficient heat source to the room.

All of our ladder rails are manufactured and packaged to the highest standard. We use 22mm horizontal tubing for improved heat outputs and aesthetics and are more appealing than the standard, smaller 19mm tube often used. 

All of our ladder rails are supplied with:

- 4 Point fixing kit 
- x1 Bleed Valve
- x1 Blank Plug
- Our Lifetime manufacture guarantee

Our Polished Stainless Steel Range of Sizes:

Straight Horizontal Tubes:

350mm(w) x 430mm(h) - 484 BTUs
350mm(w) x 600mm(h) - 698 BTUs
350mm(w) x 800mm(h) - 833 BTUs
350mm(w) x 1200mm(h) - 1274 BTUs
350mm(w) x 1400mm(h) - 1443 BTUs
350mm(w) x 1600mm(h) - 1611 BTUs

500mm(w) x 430mm(h) - 624 BTUs
500mm(w) x 600mm(h) - 904 BTUs
500mm(w) x 800mm(h) - 1058 BTUs
500mm(w) x 1200mm(h) - 1617 BTUs
500mm(w) x 1400mm(h) - 1823 BTUs
500mm(w) x 1600mm(h) - 2025 BTUs

600mm(w) x 430mm(h) - 715 BTUs
600mm(w) x 600mm(h) - 1039 BTUs
600mm(w) x 800mm(h) - 1205 BTUs
600mm(w) x 1200mm(h) - 1840 BTUs
600mm(w) x 1400mm(h) - 2068 BTUs
600mm(w) x 1600mm(h) - 2291 BTUs

1000mm(w) x 600mm(h) - 1286 BTUs
1000mm(w) x 800mm(h) - 1715 BTUs

1200mm(w) x 400mm(h) - 1007 BTUs
1200mm(w) x 600mm(h) - 1510 BTUs

Curved Horizontal Tubes:

500mm(w) x 800mm(h) - 1124 BTUs
500mm(w) x 1200mm(h) - 1718 BTUs
500mm(w) x 1500mm(h) - 2205 BTUs

Installation:
Our range of heated towel rails can be installed in 3 different ways:

1. On your central heating system.
You will also need a suitable pair or valves. We recommend using a pair of Angled or Corner Valves When you pipework is coming from the wall or a pair of straight valves when you pipework is coming up from the floor.

2. As a stand alone electric towel rail.
You will also need:
- a suitable electric heating element either standard fixed temperature or manually controlled thermostatic. 
- x1 additional blank plug.
- the towel rail to be pre-filled .

3. As a dual fuel towel rail.
You will also need:
- a suitable dual fuel valve kit (includes valve kit and electric element - pipework coming from the wall)

If you have any questions or require any technical advise please do not hesitate to contact us via the ebay messages.