TPS63020 Boost Buck Switching Power Supply Module
Converter 5V 4.2V 3.3V 2.5V Output
Description:
TPS63020 is a high-efficiency small buck-boost power supply module. The input voltage ranges from 1.8V to 5.5V, the output current can up to 3A, and the efficiency is up to 96%. It can automatically switch between buck and boost modes. The quiescent current is less than 50uA. The fixed operating frequency is 2.4MHz, Which can be used for all two-cell and three-cell alkaline batteries, NiCd or NiMH or single-cell lithium battery powered devices, ultra-small mobile PC and MID, digital media players, DSC and Camera, etc.
Features:
Module Model: TPS63020
Module Type: Automatic buck-boost switching power supply module
Input Voltage: 1.8V-5.5V (recommended to input 2V or more)
Output Voltage: 5V/4.2V/3.3V/2.5V
Output formula: R3=R1(Vout/VFB-1) Typical value VFB=500mV
2.5V: R1=82K, R3=330K
3.3V: R1=180K, R3=1M
4.2V: R1=3K, R3=22K
5.0V: R1=110K R3=1M
Output Current: within 3A
Conversion Efficiency: 96%
Static Power Consumption: 6mA/50uA(power saving mode)
Switching Frequency: 2.4MHz
Output Ripple: 10mV(no load)/10mV(Step-down load 0.5A)/30mV(Boost load 0.5A)
Module Size: 34mmx24mmx4.5mm (L*W*H)
Module Weight: about 10g
Module Interface: 2.54mm pitch
Low noise, low ripple, ultra-small size; can automatically switch between buck and boost modes.
Using Note:
(1)PS: Power saving mode (1 disabled, 0 enabled, default disabled), if you want to use this function, you need to disconnect SB1, and then input the level;
(2)EN: Enable input (1 enable, 0 disable, default enable), if you want to use this function, you need to disconnect SB2, and then input the level;
(3)PG: Output status indication (0 fault, 1 normal)
Packing List:
1pcs x TPS63020 Power Supply Module