Please note:It is a 0.3mm nozzle for 1.75mm filament extruder.If you want to change the size of it, you can contact us by ebay message or leave us a message.Thanks.
This is Geeetech upgraded single head MK8 extruder, which has outstanding quality and the best performance for DIY and professional systems. By simply adding a holder, you can assemble your own dual head extrusion.
With 42BYGHW818 stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging, material reloading.
Features:
42mm high quality stepper motor with larger torque and less heat buildup
Special ceramic insulation cotton ensures the stability of heating; electricity-saving
Direct transmission, without the heavy gears, compact size and weight
A variety of specifications to choose, the most suitable is the best
NOTE: Make sure the maximum temperature is less than 280°
Parameters:
The extrusion nozzle: 0.3mm,0.35m,0.4mm,0.5mm (optional)
The material of Print: 1.75mm or 3mm PLA/ABS
The flow rate of Nozzle: about 24cc / h
Sports shaft speed:40mm/s
The voltage of heating nozzle: 12V
Thermistor: 100K NTC
The operating voltage of cooling fan: 12V
Normal working temperature: 190°-230°
Net weight: 450g
Assembled parts details:
1.Stepper Motor:
Model: 42SHD0217-24B
2 Phase
Step Angle: 1.8 degree± 5%
Rated Voltage: 3.75V
Rated Current: 1.5A
Holding torque: 500mN.m
Detent torque: 15mN.m
Resistance Per phase: 2.5 Ω+10%
Inductance per phase: 5.0mH ± 20%
Insulation cllass:B
Length of Wire: 70cm
2. Cartridge heater
Materail: Stainless Steel, PVC, Nylon
Voltage: 12V
Power: 40w
Wire Length :1m
Heater size: 6 x 20mm(D*L)
3.Thermistor MF58
B-value:3950K±3%
Resistance:100Kohm±1%
Thermal time constant in air:≤7Sec
Operating temperature:-40℃ to +300℃
Dissipation constant in air:2.1mW/℃
Package list:
1 x assembled Geeetech MK8 extruder( 0.3mm nozzle for 1.75mm filament)