Buy with confidence from Clubtek:
The T5V is a highly affordable two-way nearfield monitor and optimized for small control rooms.
With its 5” woofer the bass-frequency response of the T5V extends to 45 Hz. The new U-ART tweeter, a breakthrough solution for use in high-resolution recording and mixing on a budget, goes up to 25 kHz and is mated to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.
A beveled cabinet with a rear-firing bass reflex port and a small footprint allows placement anywhere in your room, no matter how small, and contains built-in DSP-controlled driver crossovers and equalization as well as multi-way analog connections. Powered with a 50 W Class D amplifier for the woofer and a 20 W Class D amplifier for the U-ART tweeter, the T5V produces SPLs of up to 106 dB per pair.
Excellent acoustic characteristics, small dimensions and an outstanding cost/performance ratio make this studio monitor perfectly suited for use in small control rooms in music, video and broadcast production.
Product Feature | Benefit to the customer |
|---|---|
| U-ART 1.9” Accelerated Ribbon Tweeter |
|
| The air velocity ratio of 4:1 during the sound generation by folded U-ART membrane | Direct, fast response in the high-range even with complex transients |
| HPS waveguide from the S Series |
|
| Lightweight polypropylene construction of the woofer | Excellent transient response even at high sound levels without breakup of the diaphragm |
| Vertical 2-way system with 5” woofer | High resolution of the stereo image |
| Spacious rear-firing bass reflex port | Bass reproduction with very low compression |
| Linear frequency response of 45 Hz to 25 kHz | Unbiased reproduction in a wide frequency band |
| Maximum peak sound pressure per pair in 1 m ≥ 106 dB | Powerful, compression-free sound reproduction even at very high sound levels |
| DSP-powered crossover design | Smooth frequency response without interferences between the drivers in the critical mid-range |
| Simple room acoustic adjustments via high- and low-shelf filters | Allows optimal adaptation to acoustically difficult listening environments or individual preferences |
| Analog inputs over XLR and RCA | Optimized for balanced and unbalanced line signals |
| Acoustically optimized cabinet geometry | Reduction of unwanted reflections on the cabinets |
| Compact cabinet dimensions | Fits every desktop |
| 2 years warranty with optional extension to 3 years with the registration of the product | Full repair service if required for 5 years |
| Number | 1 |
| Basket Ø | 5" (127 mm) |
| Cone Material | Polypropylene |
| Number | 1 |
| Type | U-ART |
| Diaphragm Area | 4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø | 1.9" (48 mm) |
| Velocity Transform Ratio | 4:1 |
| Diaphragm Weight | 0.17 g |
| Waveguide | HPS |
| Number | 2 |
| Woofer | 1 |
| Type | PWM |
| Amp. Power RMS | 50 W |
| Tweeter | 1 |
| Type | PWM |
| Amp. Power RMS | 20 W |
| Input Sensitivity | Switchable +4 dBu / -10 dBV |
| Gain | Yes |
| High-Shelf | - 2 dB, 0 dB, +2 dB |
| Low-Shelf | - 2 dB, 0 dB, +2 dB |
| Analog | XLR, RCA |
| Input Impedance | 10 kOhm / 20 kOhm |
| Panel | Rear |
| Frequency Response | 45 Hz - 25 kHz |
| THD > 80 Hz | 0.5 % |
| Max. SPL per pair at 1 m | ≥106 dB |
| Crossover Frequency | 3 kHz |
| Max. Power Consumption | 132 W |
| Weight | 12.6 lbs (5.7 kg) |
| Height x Width x Depth | 11.7" x 7" x 11.7" (298 mm x 179 mm x 297mm) |
| Warranty | 5 years (2 years warranty plus 3 years optional with product registration) |
| Delivery Contents | Power cord, Quick Start Guide |
Please Note: