Also works with Neje 30w, 40w, 80w Module. This will not work with the Neje frame, but will attach your Neje module to an Ortur LM2 (square) frame.
Notes:
- Includes U-block to work as an endstop spacer for Neje and Ortur (see photos)
- We recommend moving the end stop and not using the spacer (see photo)
- YOU NEED TO ADJUST YOU END STOP
- Uses 4mm allen wrench to adjust, includes Tool Holder and T-Handle wrench
- 15w or 20w Ortur laser engraver or Neje 30w, 40w, and 80w Laser cutter/engraver upgrade.
Instructions:
Extend the Z Axis Adjuster to it's full (longest) position to gain access to the holes fore attachment (see image above Neje = blue).
Attach the Z Axis plate to Neje module using the screws that are included with the Neje's attachment bracket (there should be one larger rounded, philips head screw and one smaller allen head screw). See the color-coded infographic image on this post to see which screws go where (again, Neje = blue).
Install video can be found on Edge of Tech YouTube Channel
https://www.youtube.com/watch?v=67-mLMaSSb8
---
Originally from the design (We Have permission and pay royalties)
By PLAY3Rone977
https://www.thingiverse.com/thing:4607685
Remixed by paulmacdermot
https://www.thingiverse.com/thing:4627986
Then Modified my myself for easy install and I tightened up the tolerance to remove wobble
The T-Handle wrench is designed by Kezat
https://www.thingiverse.com/thing:951909
Drill stop collar is designed by sidchou
https://www.thingiverse.com/thing:3269839