​



2000-2007 BMW E46 325 330 i6 Turbo Charger Kit T3/T4 Manifold+Intercooler+Bov


 

HWC has the best products with the best prices. We believe in Safety and Standards in both machining and manufacturing. Unlike our competitors who offer you low prices for inferior products, we build products that lift and level your vehicle without compromise. Cutting corners is awesome when driving your car but not when manufacturing, buy right, choose Supreme.

COMPATIBLE:

1991-1995 BMW E36 325i / 325is i6 
1994-1999 BMW E36 328i / 328is i6
1995-1999 BMW E36 323i i6
1992-1999 BMW E36 M3 i6
1997-2000 BMW E46 323i / 323is / 323Ci / 323Ti i6
1998-2000 BMW E46 328i / 328Ci i6
2001-2007 BMW E46 325i / 325Ci / 325Xi / 325Ti i6
2000-2007 BMW E46 330i / 330Ci / 330Xi i6

fits vehicles running with BMW E36, E46, 2.5L, 2.8L, 3.0L M3(E36) & 3.2L S52 (except E46 M3 3.2L) 4 Cylinder Engine only


T3/T4 TURBOCHARGER

100% Brand New T3/T4 Hybrid Turbocharger! High Quality Guaranteed! cast housing with durable steel. Capable of boosting horse power up To 350+ BHP, standard 4 bolt exhaust flange, Capable of 8 PSI or 15-25 PSI output at peak power. Cnc machined flanges. Internal wastegate setting: 8 PSI. High quality t04e with a forged turbine propeller wheel!

1. Turbo Specification:
- Standard 5 bolt T3 Downpipe Flange.
- 5 Bolt Standard Hot Side.
- Standard T3/T4 Flange.
- Oil Inlet - 1/8 NPT Oil Inlet.
- Bearing Type - Journal Bearing.
- Wet Floating Bearings.
- Cooling Type: Oil Cooled.

2. Compressor Specs:
- 3" Compressor Inlet.
- 2.07" Inducer.
- 2.36" Major.
- 2" Compressor Outlet .
- T04B/T4 Type Compressor Housing.
- Compressor .50 A.R.
- Compressor .57 Trim.
- 8 Blade Type T4 Compressor Wheel.

3. Turbine Size: 
- T3 Type 4 Bolt Turbine flange.- 5 bolt Exhaust flange.- Turbine .63 A.R. - 2.48" Minor and 2.89" Major Propellar.- T3 Turbine Housing.- 2.274" Outlet.-


INTERCOOLER:

1. 6061 Light Weight Billet Aluminum Construction.
2. Tube & Fin Light Weight Design.
3. Construction: Machine Cut and Stamped Hand Welded.
4. Working Pressure: 5~50PSI.
5. Pressure Drop:2~5psi@35psi;0.2~0.5psi@15psi.
6. Hot Air Temperature: 32°F~302°F (0°C~150°C)
7. Compress Air Flow Rate: < 350 Cubic Feet/Min Rated to 500 Max HP.
8. Overall Size - 27" x 7" x 2.5"
9. Core Size - 21" x 6.5" x 2.5"
10. In/Outlet - 2.5" OD / 2.25" ID


PIPING:

1. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping.
2. Powder-Coated Surface Finish.
3. 2.5" Piping Diameter.
4. 2.0mm Pipe Thickness.
5. Increase 65% Air Flow comparing with other Standard Piping.


SILICONE COUPLER:

1. Material:Made of high quality silicone material
2. Thickness of wall:5 mm, 4 ply reinforced
3. Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)
4. Bursting Pressure: 2 Mpa
5. Working Temperature: -76°F (-60°C ) to +500°F (+260°C)
6. Size tolerance:+/-0.5 mm


T-BOLT CLAMP:

1. Made of High quality 301 ss Stainless Steel Clamp
2. Stainless steel construction resists corrosion
3. Provide uniform sealing pressure for a positive
4. Polished finish increases engine bay aesthetics


TURBO MANIFOLD:

1. Standard T3/ T4 (T03/ T04) Turbo Flange Configuration Outlet.
2. Included Wastegate Flange for 35mm/38mm external WG.
3. Increase Engine Intercooler Output and Efficiency.
4. Made of High Quality Cast Iron Material for Strength and Durability.


TURBO DOWNPIPE:

1. Made by High Strength T-304 Stainless Steel Construction.
2. Increases High Flow Air Rate and Maximizes Performance.
3. TIG Welded CNC Machined Flange and Mandrel-Bent Piping.
4. Made of High Quality T304 Polished Stainless Steel Material.


INTAKE FILTER:

1. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable.
2. Improves Up to 95% Filtration Efficiency.
3. Designed to increase horsepower and acceleration.
4. Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"


BLOW OFF VALVE:

1. Aggressive JDM racing discharge sound.
2. 8 Discharge ports that draw in surrounding air and release a unique discharge sound.
3. 40mm hard-anodized valve for increased airflow.
4. Dual spring system promoted response and allows for high boost pressures.
5. Support up to 30 PSI boost pressure.


OIL LINE:

1. OIL DRAIN FEED LINE.
2. 10AN Fittings.
3. Inner Diameter: 0.50"
4. Length: 17.00"
5. CNC Machined Turbo Adapter Plate.
6. Weldable 10AN Oil Pan Fitting Included.
7. Inner Diameter: 0.25"
8. Length: 36.00"
9. 1/8 NPT Fittings Natural Polish Finish.
10. CNC Machined Turbo Adapter Plate.
11. Brass Fitting Block Fitting and Port Cover Included


BOOST CONTROLLER:

1. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.
2. High Performance Manual Boost Control From 0~30 psi Capacity.
3. CNC Machined Light Weight and Resistant to Rust.
4. Hose clamp and all necessary hardware for complete installation.
5. 1-30 PSI Adjustable.


WASTEGATE:

1. High strength Alloy aluminum body with steel head.
2. Comes with 8 psi spring installed.
3. Protect the turbo system from over boosting.
4. Complete install kit included .


ATTENTION:

1. For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. If item is questionable please consult your local professional/mechanic before making purchase.
2. Color may randomly selected depend on hand or inventory.
3. NO instructions included. modification might required for complete installation.
4. Professional TURBO INSTALLER is Highly recommend. Any damage during installation will not be refunded.
5. Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrive.
6. The piping that comes with this kit is universal, and will have to be modified to fit most applications
7. Don't hesitate to contact us if item stuck, unknown or fault installation !!




Purchase now for only $648.90!

 



Transit


  • We strive to ship items as soon as possible. To receive your order as soon as possible, please review shipping policy below:
    •  
    • Items are shipped at 10am PST Monday-Friday, with the exception of US Holidays
    • Orders will be shipped same day if purchased before 10am, with the exception of US Holidays and weekends
    • Surcharges will be added to VI, PR, HI, AK, MP, AS
    • Some (large) items cannot be shipped to PO Box or APO/FPO
    • International buyers are responsible for CUSTOMS FEES and/or DUTY FEES upon import
    • Ships from USA (west coast)
Continental USA US Territories Canada International
$0.00 $0.00
+surcharge		 $220.00 $750.00

Returns Warranty
 
  • Prepaid return shipping labels offered for customers who experience defective items, or items received that are not represented by this listing
  • Any other returns are subject to up to 20% restocking fees, depending on the item itself, length of return, and condition of the return
 
  
  • Items must be returned for inspection to take advantage of the three-month warranty
  • We Offer Prepaid Return Shipping Labels (Within 14 Days) For Our Customers Who Either Received A Damaged/Defective Item, Or An Item That Was Not As Described!
 

Contact

 

  • For item inquiries, please click "Ask Seller A Question" or "Contact Seller" link. We Strive To Respond In A Timely Fashion!
  • E-mails are responded to within 24 hours Monday-Friday, with the exception of US Holidays
  • We Strive For 100% Customer Satisfaction, If You Are Not 100% Satisfied With Your Purchase, Please Contact Us Prior To Leaving Feedback! We Would Very Much Appreciate A Chance To Make Things Right!