Why purchase a recycled keyless entry remote transmitter?

The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!

Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.

What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system.

Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below.

Viper DEI Directed Electronics Inc.

Compatible FCC ID#(s):

 FCC ID EZSDEI474V

Alternate Spellings

EZS-DEI474V, EZS DEI474V, EZSDEI474V, EZSDE1474V, EZ5DEI474V

DEI Headquarters, Inc. Viper Transmitter, Model 474V DEI474V

Part #(s)

 
Interchangeable Part #’s:
470
474
475
476
485
820041
7143
26131
SAA474U

P/N - MODEL: 474V/P/S/T/L

473V/P/S/T/L, 474V/P/S/T/L

Dealer #(s)

 

Button Count:

4 button; Lock, Unlock, Aux, Panic

Battery (installed):

 1; CR2032

Frequency:

433 -434 MHz  (433MHz)

LED Light Color:

 Green

Circuit board #s:

 
 DTGB

#s on Chip on board:

Condition Notes:

 Pre-Owned ready to program to your compatible vehicle RKE system.

Compatible Aftermarket Installed Systems:

 Automate

Automate 6

Automate 7

Automate 10

Automate 25

Automate 35

Automate 410

Automate 425

Automate 435

Automate 52

Automate 53

Automate 552

Automate 553

Avital

Avital 2100

Avital 2200

Avital 2300

Avital 3100

Avital 3200

Avital 3300

Avital 4000

Avital 4100

Avital 4200

Avital 4300

Avital 4400

Maxx2

Maxx3

Hornet

Hornet 533 T

Hornet 554 T

Hornet 740 T

Hornet 742 T

Hornet 851 T

Python

Python 400 HP

Python 440 HP

Python 450 ESP

Python 460 HP

Python 500 HP

Python 625 HF

Python 650 ESP

Python 660 XP

Python 700

Python 900

Python 1000 HF

Python PC 1000 HF

Python 1200 XP

Python 1400 XP

Python 1500 HF

Python 1600 XP

Python 2000 HF

Python 3000 HF

Python 3000 ESP

Sidewinder

Sidewinder 3000 HF

Sidewinder 3000 ESP

Sidewinder 3200 HS

Sidewinder 3300 HS

Sidewinder 3500 ESP

Sidewinder 4500 HF

Sidewinder 5000 HF

Sidewinder 5000 ESP

Sidewinder 5500 XS

Sidewinder 6000 HF

Sidewinder 6000 ESP

Sidewinder 6500 HF

Sidewinder 6500 ESP

Sidewinder 7000 HF

Sidewinder 7000 ESP

Sidewinder PC 7000 SHF

Rattler

Rattler 100

Rattler 110 D

Rattler 200

Rattler 210 D

Rattler 250

Rattler 259 R

Rattler 300

Rattler 310 D

Rattler 359 R

Rattler 369 D

Valet

Valet 450 R

Valet 519 H

Valet 551 R

Valet 552 T

Valet 562 T

Valet 561 R

Valet 712 T

Valet 716 T

Merlin

Merlin 2000

Ungo

Ungo K10

Ungo K20

Ungo RK1

Ungo RS10

Ungo S100

Ungo S400

Ungo S660

Ungo S670

Ungo SR1000

Ungo SR5000

Ungo SR6000

Viper

Viper 100 HF (ESP)

Viper 130 HV

Viper 150 ESP

Viper 160 XV

Viper 210 HV

Viper 211 HV

Viper 300 HF

Viper PC 300 HF (ESP)

Viper 300+ HF

Viper 330 V

Viper 350 HV

Viper 500 HF

Viper PC 500 HF (ESP)

Viper 550 HF

Viper 550 HF (ESP)

Viper 560 XV

Viper 571 XV

Viper 600 HF

Viper PC 600 HF (ESP)

Viper 650 XV

Viper 671 XV

Viper 700 ESP

Viper 771 XV

Viper PC 800 SHF

Viper 800 SHF ESP

Viper 850 XV

Viper 1000

Viper 1002

Viper 3000

Viper 3002

Viper 5000

Viper 5002

Viper 7900

Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.

Programming: Please Note:

A Valet / Programming switch is required to program this remote.

Programming can be difficult if you are not familiar with it. Please read the programming instructions (below) before purchasing. Assistance from an auto specialty shop or locksmith may be needed.

Programming Instructions:

The vehicle's system can store up to 4 transmitters (remotes) into memory. Use the following programming routine to add transmitters to the vehicle's security system or to change button assignments if desired.
In order to enter Learn Routine, the Valet/Program push button must be plugged into the main brain's Blue 2 Pin Port (Look for a small black push button located under the drivers dash or drivers kick panel somewhere).
The Valet/Program switch, plugged into the blue port, is used for programming. There is a basic sequence of steps to remember whenever programming this unit.

1) Open a door and make sure the dome light is on.

2) Turn the ignition on to the RUN position or you may also start car.

3) Within 10 seconds, press and release the Valet/Program switch the number of times that corresponds to the desired channel (listed below). Once you have selected the channel, press the switch once more and HOLD it. The LED will flash and then the horn will chirp (if connected) to confirm the selected channel. Do not release the Valet/Program switch.

CHANNEL # FUNCTION
1 Arm / Disarm / Panic
2 Silent Mode / Remote Valet / Trunk Release
3 Remote Start or other accessories
4 Arm only (4 button remote)
5 Disarm only (4 button remote)
6 Panic only (4 button remote)
7 Auto Program single Arm -- Disarm -- Panic button configuration (4 button remote)
8 Auto Program this remote
9 Delete all transmitters

CHANNEL 9:

If any transmitter button from a known transmitter is programmed to channel 9, all transmitters will be erased from memory. This is useful in cases when one of the customer's transmitters is lost or stolen. This will erase any lost or stolen transmitters from your system's memory. It can also be used to start from scratch if the transmitter buttons were programmed incorrectly.

4) You can advance from programming one channel to another by releasing the Valet/Programming switch and tapping it to advance channels and then HOLDING it. For instance; you have programmed Channel 1 and you want to program Channel 2. Release the Valet/Program switch. Press it one time and release it to advance from Channel 1 to Channel 2. Now, press and HOLD the Valet/Program switch. The LED will flash 2 times and the horn will chirp twice (if connected). As before, do not release.

If you want to program Channel 3 after programming Channel 1, release the Valet/Program switch, press it twice and release it to advance to Channel 3. Then press it once more and HOLD it. The horn will chirp 3 times (if connected) and the LED will flash 3 times to confirm it is ready to receive the code from the transmitter.

5) Once the code(s) are learned, the Valet/Program push button can be released.

6) Programming mode will be exited if one of the following actions occurs:
a. Ignition key is turned to the OFF position
b. Valet/Program switch is pressed too many times.
c. More than 15 seconds elapses between programming steps.

The horn will emit one long chirp when programming mode has been exited.

Why does your vehicles installed RKE / Security system determine which remote control your can purchase?

The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.

Programming:

We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.

Programming Requirement Information NOTE:

The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:

        1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.

 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.

To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:

i.      If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)

ii.      If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)

 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.

      

 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).

     

 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).

      

6. There are also many auto forums that you can go onto by just conducting a google search with your questions.

       

7.  or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.