9imod F540-V2 4370KV Brushless Sensorless Waterproof Motor 3.175mm+60A ESC For 1/10 RC Drift Racing Off-road Car Truck

Motor Features:
1.4 Pole 12 Slot Hi-torque Motor Design.
2.High Quality: CNC Machined 6061 T6 Billet Aluminum Heatsink Can, High Purity Copper Windings Maximizes Efficiency, High RPM ABEC5 Oversized Bearings.
3.Universal fit its all 1/10 brushless cars-multi-mounting system for M3 screws.
4.Precision balanced rotor,smoothness for best reliability and maximum RPM.
5.Stator - Super Thin (0.2mm) Laminations.

ESC Features:
1.Water-proof and dust-proof for all-weather races. (Note: please uninstall the cooling fan before using this ESC in water,Clean and dry it soon after the use for avoiding the connectors get rusty).
2.Specially designed for RC car with excellent start-up, acceleration and linearity features.
3.Compatible with sensorless brushless motor.
4.The strong resistant current capability, excellent heat dissipation.
5.Multiple protection features: Low voltage cut-off protection for lithium or nickel battery/over-heat protection/ Throttle signal loss protection/ Motor blocked protection/
6.Easily programmed and compatible with pocket-sized program card.

Program Card Features:
1.Suit for 25/35/45/60/80/120A ESC.
2.This Programing Card is easy to use.
3.It can program brake force, reverse force, low voltage protection, start mode and neutral range.

Descriptions:
1.This professional brushless motor comes with high quality.
2.Removable/Replaceable Rotor, Precision Engineered for Maximum Energy Conversion.
3.This is Electronic Speed Controller(ESC)for car. High power system for RC model is very dangerous, so please read this manual carefully. Since we can't control over the correct use, installation, application, or maintenance of our products, we've no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the operating, failure of malfunctioning etc will be denied. We assume no liability for personal injury,consequential damages resulting from our product or our workmanship.

Specifications:
Brand:9imod
Item Number:F540-V2
Color: black
Material: aluminum alloy
KV : 4370KV
Watts: 800W
Max voltage: less than 12V
Max Amps: 66A
Rotor poles: 4
IO: 3.2A
Resistance: 0.0185
Max RPM: 50000
Length:50mm
Diameters:36mm
Shaft: 3.175mm
Length of extending shaft: 15mm
Connector: 4.0mm gold
Applicable models: 1:10brushless cars
Product Size:50*36mm

ESC Specifications:
Name: 60A ESC
Cont.Current:60A
Burst Current:360A
Motor Type: Sensorless Brushless Motor
For 2S Lipo or 6 cells NiMH :
1. on-road: 3660-Size or smaller motor with the KV<4300KV
2. off-road/Buggy/Monster: 3660-size or smaller motor with the KV <3300KV
For 3S Lipo or 9 cells NiMH :
1. on-road: 3660-Size or smaller motor with the KV<3300KV
2. off-road/Buggy/Monster: 3660-size or smaller motor with the KV <2600KV
Suitable Car: 1/10 RC Car
Resistance: 0.0007ohm
Battery: 2-3S Lipo/4-9Cells NiMH
BEC Output: 5.8V/3A (Switch mode)
Dimensions:51.5x38.5x38.5mm
Weight:76g

LED Program Card Specifications:
Use: Vehicles & Remote Control Toys
For Vehicle Type: Cars
Remote Control Peripherals/Devices: LED Program Card
Only Apply to: Racerstar
Material: plastic
Low voltadge cut off voltadge: 3.1V/Cell 2.9V/Cell 2.7V/Cell No cut-off
Start mode：Medium soft strong
Max brake force: 25%,50%,75%,100%,
Max reverse force: 25%,50%,75%,100%,
Neutral range: 6%,9%,12%,work state
Size:60*48*6mm
Weight:20g

Programmer operation instructions:
A) Connect the BEC wire of the electric adjustment to the programmer in the direction of the color shown above (the black ground wire is on the right border).
B) Connect the power supply of the electric adjustment and turn on the power switch (80A and 120A should press the key of the electric adjustment.
C) When the programmable green LED flickers twice on the programmer, it always brightens to indicate that the electric tuner and the programmer are connected successfully. When the programmable LED is sub-extinguished, the programmer reads out the current programmable parameters of the electric adjustment and displays the corresponding LED in the corresponding project. Otherwise, the connection will fail.
D) The downward button on the programmer can be selected in different programming projects. The corresponding LED lights of the selected current project will be on in turn, indicating the currently selected project.
E) Press the right button on the programmer to select the current content to be set in the current selected project, and the selected content LED lights will be on.
F) Repeat the operations of D and e to select all the contents that need to be set.
G) According to the programming keys on the programmer, the contents set above are programmed to the electric adjustment. At the beginning of programming, the programming LED lights turn on and go out after 5S indicates that the programming is successful. Otherwise, the programming fails (after turning off the power, reprogramming).
H) Press the factory button on the programmer to indicate that the power adjustment will be restored to the default settings of the factory. At the beginning of programming, the programming LED lights turn on and go out after 5S indicates that the programming is successful. Otherwise, the programming fails (after turning off the power, reprogramming).

Package Included:
1 x F540-V2 4300KV Brushless Motor
1 x 60A ESC
1 x LED Program Card
1 x English Manual

Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!