MAIN FEATURES:

- Power Output :1 Kw , max 1.1 kw (adjustable from front panel)

- RF Output Impedance : 50 ohm

- RF Output : “N”(50-100W for version ), “7/16”(300-500-1000W for versions) 

- Monitor RF : BNC connector

- VSWR : 1,5:1 with automantic foldback

- Frequency Range : 87.5 ÷ 108.00 MHz, on request 66 ÷ 74 MHz ( OIRT), 76 ÷ 90 MHz (JPN) Programmable in 10kHz steps

- Frequency Stability : ±1 ppm from -5 to 45°C

- Type of Modulation : Analog

- Off Lock Attenuation : ≥ -80 dBc

- Modulation Capability : ±150 KHz

- Limiter built in

- Power Good Detector : adjustable from 20÷90% of the power

- Audio Presence Detector : adjustable time from front panel

- External AGC : Automatic, with fine ADJ back panel

- Modulation Mode : Mono, Stereo, Multiplex, SCA, RDS, Aux

- Preemphasis : Flat/50/75μs selectable from front panel

- Asynchronous : AM S/N Ratio -70 dB

- Synchronous : AM S/N Ratio -65 dB

- RF Harmonics : Exceeds EBU/CCIR/FCC requirements

- RF Spurious : Exceeds EBU/CCIR/FCC requirements

- AC Input Power : 90÷260 VAC 1phase, 180÷400 VAC 50/60 HZ 3phase

- AC Apparent Power Consumption : 6800VA @ 5kW, 8200VA @ 6kW

- Cos ∅ : > 0.98

- Cooling : Forced air

- ENVIRONMENTAL Operating temperature : -10°C to +50°C

- Max Operating Altitude : 4500 mt

- Relative Humidity Range : 0 to 90%

- Mounting Standard 19” chassis 4 U rack

- Size : W x 483 mm. D x 470 mm. H x 88 mm 

- Weight :~ 6,0 Kg. (50-100w), 8Kg. (300-500-1000W)

MONO OPERATION:

- Input Impedance : 600 ohm - 10 Kohm balanced

- Input Level : -6 to +12 dBm

- Input Connector : XLR female

- Frequency Response : ±0.1 dB, 20 Hz to15 KHz

- Total Harmonic Distortion + Noise : 0.1% @ 400 Hz

- Intermodulation Distortion : 0.1%, 1 KHz/1.3 KHz, 1:1 ratio

- Transient Intermodulation Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave

- Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave

- FM S/N Ratio : -80 dB ±75 KHz dev.

STEREO OPERATION

- Input Impedance : 600 ohm - 10 Kohm balanced

- Input Level : -6 to +12 dBm

- Input Connector : XLR female

- Frequency Response : ±0.1 dB, 20 Hz to 15 KHz

- Total Harmonic Distortion : + Noise 0.1% @ 400 Hz

- Intermodulation Distortion : 0.1%, 1 KHz/1.3 KHz, 1:1 ratio

- Transient Intermodulation Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave

- FM S/N Ratio : -80 dB below ±75 KHz dev.

- Stereo Separation : 1kHz ≥ -60dB

- Crosstalk attenuation Main to Sub : -70 dB 30 Hz to 15 KHz

- 38 KHz Suppression : ≥ -85 dB

- Pilot Frequency : 19 KHz ± 1 Hz

- Output Pilot : 1 Vpp., BNC female

MULTIPLEX OPERATION

- Composite Input Impedance : 2 Kohm unbalanced

- Composite Input Level : -6 to +12 dBm

- Input Connector : BNC female

- Composite Amplitude Response : ±0.1 dB, 30 Hz to 100 KHz

- Total Harmonic Distortion + Noise : 0.1% @ 400 Hz

- Intermodulation Distortion : 0.1%, 1 KHz/1.3 KHz, 1:1 ratio

- Transient Intermodulation Distortion : 0.1% 2.96KHz square wave and 14 KHz sine wave

- FM S/N Ratio : -80 dB ±75 KHz dev.

AES/EBU OPERATION

- Input Connector : XLR female, optical TOS-LINK

- Input Impedance : 110 ohm

- Input Level : -20 to +0 dBfs

- Data Format : S/PDF, AES/EBU, IEC958, EIAJCP340/1201

- Sampling Frequency from : 32 to 96 KHz

SCA, RDS, AUX OPERATION

- Input Impedance : ≥ 2 Kohm

- Input Level : -6 to +12 dBm

- Frequency Response : ±0.1 dB, 50 KHz to 100 KHz

- Input Connector : BNC female

AUXILIARY CONNECTIONS

- RS485 DB9 connector back panel

- Telemetry Interface connector DB25 back panel

- LAN RJ45 connector back panel

- MPX OUT connector BNC back panel

OPTIONS 

- AES/EBU -SPDIF ==> Ask Price

- RDS/RBDS Programmable Coder via PC => Price 230 USD

- OIRT or JPN version ==> Ask Price

- SNMP v2-v3 ==> Ask Price

- Audio Over IP ==> Ask Price

- DDS Direct Digital Synthesis ==> Ask Price

- SFN Reference ==> Ask Price