For FN 509 Tactical. Fits directly using FN 509 Tactical Provided Doctor/Vortex Venom/Burris Fastfire footprint mounting plate.
Please pay attention:
It fits FN 509 TACTICAL(optics ready)
It does NOT fit FN 509(not optics ready)
Please READ! FN 509 Tactical is Optics Ready, it has a optic cut in front of the rear sight,
which comes with several Optics plates.
This red dot fits one of the plates that provided by FN that marked for
vortex/burris/doctor type of red dots.
FN 509 is NOT optics ready, it does NOT have a optic cut in front of the
rear sight. Therefore, FN 509 can NOT use the optic plates provided by FN. The
red dot in this does NOT fit FN509. It only fits the OPTICS READY model which
is FN509 TACTICAL.
If you are NOT sure if this red dot will fit your pistol, please Click HERE to send us a message of EXACT model of your pistol, we will let you know if you need a optic plate(it could an aftermarket plate to replace the rear sight, or pistol factory provided plate for Optic Ready pistol) and we will provide precise information of the plate you need. You will receive the reply within 8 hours Monday-Sunday.
Fully shockproof and fogproof.
Waterproof guranteed for 30 minutes under 1.7feet
Lenses are precision ground and polished to
exacting geometries to virtually eliminate parallax and to provide a very
clear, crisp sight picture
Fully windage and elevation adjustable and
lockable
5 MOA
5 Illumination Settings.
Powered by a lithium CR2032
battery(Included)
Magnification: 1X
Sight Window: 25mm x 16mm; .98" x .62"
Elevation Adustment Range: 3° or 190"
@ 100 yds (524 cm @ 100 m)
Windage Adjustment Range: 3° or 190" @
100 yds (524 cm @ 100 m)
Set Value for One Scale Division: 1 MOA or
1" @ 100 yds with 60 scale divisions per turn
Subtension of the Aiming Dot: 4 MOA (10.5
cm @ 100 m)
Parallax-Free Sighting Distance: approx. 50
yds
Recoil Resistance: At least 1000 Gs
Operating Temperature Range: -10°F to
+130°F (-25°C to +55°C)
Storage Temperature Range: -40°F to +160°F
(-40°C to +70°C)
Power Supply: 3V with one CR 2032 Lithium
battery
Dimensions: L 2.0" x W 1.0" x H 1.1"
(52 mm x 26 mm x 28 mm)
Weight (in operating condition without
mounting materials): 0.9 oz (25 g).
Included:
Allen wrench to tighten fasteners
Screwdriver
Adjusting disc
Protective cap
3V Lithium battery (CR 2032)
Operating instructions
Weaver/Picatinny-style mount
Extra rubber sealing ring for battery compartment
This ADE RD3-009, alone with RD3-006,RD3-012,RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint. This RD3-009, and RD3-006, RD3-012 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.