​



BLUE B18 DC2 Integra GS-R Bolt-On Turbo Kit T3/T4 CHARGER KEEP AC PW 245HP@10PSI


 

HWC has the best products with the best prices. We believe in Safety and Standards in both machining and manufacturing. Unlike our competitors who offer you low prices for inferior products, we build products that lift and level your vehicle without compromise. Cutting corners is awesome when driving your car but not when manufacturing, Allow to keep Power Steering. buy right, choose Supreme.

1992-1995 B16A Civic SiR II JDM
1992-1995 B16A2 Civic Vti EDM
1999-2000 B16A2 Civic Si USDM
1994-1997 B16A3 Del Sol VTEC USDM
1994-1997 B16A3 Del Sol Vti-T EDM
1994-1997 B16A3 Del Sol Vti-T EDM
1996-2000 B16A4 Civic SiR II JDM
1997-2001 B16B Civic Type-R JDM TYPE R
1994-2001 B18B1 Integra USDM
1994-1995 B18C Integra Si VTEC JDM
1995-1999 B18C Integra SiR-G JDM
1996-2000 B18C Integra Type R JDM
1994-2001 B18C1 Integra GS-R USDM
1996 B18C3 Civic VTi 1.8
1997+ B18C4 Civic 1.8 Vti EDM
1997-1998 B18C5 Integra Type R USDM
2000-2001 B18C5 Integra Type R USDM
1996+ B18C6 Integra Type R EDM
1996+ B18C7 Integra Type R Australia

**This kit allow to Retain AC & Power Steering System
**Minor modification require for Radiator, intercooler or hardware fitting
**Designed for most vehicle running a B16/B17/B18/B20 swap (Civic, Integra, Del Sol etc)
**Major modification for 88-91 Civic CRX ef models
**Professional TURBO INSTALLER is Highly recommend. Any damage during installation will not be refunded.

Condition:
100% Brand New Never Used or installed.
TURBOCHARGER
Turbo Spec:
Standard 5 bolt T3 Downpipe Flange.
5 Bolt Standard Hot Side.
Standard T3/T4 Flange.
Oil Inlet - 1/8 NPT Oil Inlet.
Bearing Type - Journal Bearing.
Wet Floating Bearings.
Cooling Type: Oil Cooled.
Compressor Spec:
3" Compressor Inlet.
2.130" Inducer.
2.755" Major.
2" Compressor Outlet .
T04B/T4 Type Compressor Housing.
Compressor .49 A.R.
Compressor .50 Trim.
8 Blade Type T4 Compressor Wheel.
Turbine spec: 
T3 Type Turbine flange.
T3 5 bolt flange.
Turbine .57 A.R. 
2.205" Minor and 2.570" Major Propellar.
T3 Turbine Housing.
2.274" Outlet.
12 Blade Type Turbine.

BOTTON MOUNT MANIFOLD
Standard T3/ T4 (T03/ T04) Turbo Flange Configuration Outlet.
Included Wastegate Flange for 35mm/38mm external WG.
Increase Engine Intercooler Output and Efficiency.
Made of High Quality Cast Iron Material for Strength and Durability.

DOWNPIPE
Made by High Strength T-304 Stainless Steel Construction.
Increases High Flow Air Rate and Maximizes Performance.
TIG Welded CNC Machined Flange and Mandrel-Bent Piping.
Made of High Quality T304 Polished Stainless Steel Material.
Pre-Weld O2 Bung.

BOOST GAUGE
measures up to 35 psi in pressure.
Digital display with Blue and Red LED.
Smoke tint lens during the day
clear and bright LED Display during the night.
High accuracy and easy operation.

INTERCOOLER
6061 Light Weight Billet Aluminum Construction.
Tube & Fin Light Weight Design.
Construction: Machine Cut and Stamped Hand Welded.
Working Pressure: 5~50PSI.
Pressure Drop:2~5psi@35psi;0.2~0.5psi@15psi.
Hot Air Temperature: 32°F~302°F (0°C~150°C)
Compress Air Flow Rate: < 350 Cubic Feet/Min Rated to 500 Max HP.
Overall Size - 28.95" x 7" x 2.5" 2.5" 
Core Size - 21.5" x 6.5" x 2.25"
In/Outlet - 2.5 OD

PIPING KIT
Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping.
Powder-Coated Surface Finish.
2.5" / 2.25" Intake piping Diameter.
2.0mm Pipe Thickness.
High Strength Silicon Coupler Hoses (3 Layers of Silicone)
Durable Stainless Steel T-Bolt Clamp Included.
Increase 65% Air Flow comparing with other Standard Piping.
Come with BOV pre-weld Flange.

SILICONE COUPLER
For High Temperature and High Boost Application.
Withstands Operating Temperatures from -65F to 500F Degrees Fahrenheit.
Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine Movements.
4-Ply Nylon for Strong Reinforcement.
Working pressure 80 PSI.
Burst pressure 245 PSI.

INTAKE FILTER
Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable.
Improves Up to 95% Filtration Efficiency.
Designed to increase horsepower and acceleration.
Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"
SHORTY EXTERNAL WASTEGATE
High strength Alloy aluminum body with steel head.
Comes with 8 psi spring installed.
Protect the turbo system from over boosting.
Complete install kit included .

BOOST CONTROLLER
Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.
High Performance Manual Boost Control From 0~30 psi Capacity.
CNC Machined Light Weight and Resistant to Rust.
Hose clamp and all necessary hardware for complete installation.
1-30 PSI Adjustable.

BLOW OFF VALVE
Aggressive JDM racing discharge sound.
8 Discharge ports that draw in surrounding air and release a unique discharge sound.
40mm hard-anodized valve for increased airflow.
Dual spring system promoted response and allows for high boost pressures.
Support up to 30 PSI boost pressure.

OIL DRAIN & FEED LINE
OIL DRAIN FEED LINE.
10AN Fittings.
Inner Diameter: 0.50"
Length: 17.00"
CNC Machined Turbo Adapter Plate.
Weldable 10AN Oil Pan Fitting Included.
Inner Diameter: 0.25"
Length: 36.00"
1/8 NPT Fittings Natural Polish Finish.
CNC Machined Turbo Adapter Plate.
Brass Fitting Block Fitting and Port Cover Included.

NOTICE
  • This auction is for Honda B-series B16 B17 B18 B20 Dual Cam Dohc models only.
  • For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. No installation instruction included unless otherwise specified. If item is questionable please consult your local professional/mechanic before making purchase.
  • Color may randomly selected depend on hand or inventory.
  • NO instructions included. modification might required for complete installation.





 



Transit


  • We strive to ship items as soon as possible. To receive your order as soon as possible, please review shipping policy below:
    •  
    • Items are shipped at 10am PST Monday-Friday, with the exception of US Holidays
    • Orders will be shipped same day if purchased before 10am, with the exception of US Holidays and weekends
    • Surcharges will be added to VI, PR, HI, AK, MP, AS
    • Some (large) items cannot be shipped to PO Box or APO/FPO
    • International buyers are responsible for CUSTOMS FEES and/or DUTY FEES upon import
    • Ships from USA (west coast)
Continental USA US Territories Canada International
$0.00 $0.00
+surcharge		 $200.00 $700.00

Returns Warranty
 
  • Prepaid return shipping labels offered for customers who experience defective items, or items received that are not represented by this listing
  • Any other returns are subject to up to 20% restocking fees, depending on the item itself, length of return, and condition of the return
 
  
  • Items must be returned for inspection to take advantage of the three-month warranty
  • We Offer Prepaid Return Shipping Labels (Within 14 Days) For Our Customers Who Either Received A Damaged/Defective Item, Or An Item That Was Not As Described!
 

Contact

 

  • For item inquiries, please click "Ask Seller A Question" or "Contact Seller" link. We Strive To Respond In A Timely Fashion!
  • E-mails are responded to within 24 hours Monday-Friday, with the exception of US Holidays
  • We Strive For 100% Customer Satisfaction, If You Are Not 100% Satisfied With Your Purchase, Please Contact Us Prior To Leaving Feedback! We Would Very Much Appreciate A Chance To Make Things Right!