Extreme Rugged AirTag Case Are you using an AirTag to help secure your motorcycle, quad, SxS, mountain bike or other outdoor gear? Then this is the case you need. This extremely tough, stealthy, waterproof, dustproof, mudproof, O-ring sealed case is designed specifically to protect an AirTag in extreme environments with multi-point mounting.
For use with zip-ties (metal or plastic) to mount to your vehicle frame or other secure location. Two plastic zip-ties are included.
This ain't no 14k gold and leather fancy-schmancy keychain case to show off for looks. It's a no-nonsense, low-profile, stealthy, ultra-tough case designed to help protect your AirTag, so it can track your highly expensive items and vehicles. Available in black or bright orange.
Powersport theft (dirtbikes, quads, SxS) is skyrocketing. Couple an AirTag with this case, mount it in a hidden, secure location on your vehicle, and greatly increase the chances of locating your stolen item.
Save money on shipping - buy two or more with no additional shipping fees.
Designed and manufactured in Virginia, USA.
Apple AirTag Not Included.
Note: This case exceeds the operating temperature range of the Apple AirTag (-22º to 140º F / -30º to 60º C), however you should not mount the AirTag in any location which will expose it to temperatures outside that range or the AirTag may be damaged. Avoid mounting near engines, exhaust, or other sources of heat that exceed 140º F (60º C).
Instructions
- Locate seam between the bottom and top halves of the case.
- Using a counter-clockwise rotation ("lefty-loosey, righty-tighty") unscrew the top half from the bottom half. Due to O-Ring compression, moderate force may be required at first, as the halves tightly and firmly seal together.
- DO NOT ATTEMPT TO PRY CASE APART. Assuming you can even apply enough force, the case will break before it can ever be pried apart in that manner.
- Insert AirTag into the half that has the exposed threads sticking out. We recommend inserting the AirTag with the shiny part facing outwards towards you. This allows for easier removal in the future by catching the edge of the metal with your fingernail.
- Align threads of the two halves together, and rotate clockwise to close.
- When the O-Ring seal begins to compress it will require more force to continue rotating. Continue rotating until the halves are evenly aligned with one another.
- Use zip-ties in the mounting holes to suit your mounting location.
Removal: Cut zip ties, then follow the instructions again to open the halves. You will have to use new zip ties to re-mount. These can be obtained from most any retailer, such as Walmart, Dollar General, eBay, auto stores, etc.