SKYRC LEOPARD 9T 4370KV 10T 3930KV 12T 3300KV 13T 3000KV Brushless Motor w/60A ESC Program Card Power System for 1/10 RC Car
Description:
This 1/10 set is ready to run out of box, coming with 60A ESC, brushless Motor and Program Card.
This combo is perfect for 1/10th scale Car. When you connect the ESC with the program card, you could tune and tweak all your favorite settings such as cut-off voltage, brake and punch strength, drag brake and other parameters that add up to an incredible RC driving experience.
Features of Motor:
Hight RPM precision bearings.
High temperature neodymium magnet.
Sensor-based for excellent torque and low-speed drivability.
CNC Machined Billet T6 Aluminum Heatsink Can.
Hight Purity Copper Windings Maximizes Conductivity.
Hight Power Solder Tabs.
Precision Engineered for Maximum Energy Conversion.
Specifications of Motor:
Brand: SKYRC
KV:4370KV(9.0T)/3930KV(10T)/3300KV (12T)/3000KV(13T) optional
Power supply: 2-3S LiPo battery
Outer diameter: 36mm
Length: 50mm
Rotor: 16mm
Shaft diameter: 3.17mm
Weight:164g
Features of ESC:
Less resistance, less heat, more effective.
Safety features: low voltage protection, motor and ESC overheat protection and signal lost protection.
Equipped with 5V/2A BEC, it doesn't need a separate receiver pack
With Program Card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters
Built-in electronic ON/OFF switch
Support both sensored and sensorless motors
Specifications of ESC:
Controls, Leopard 60A ESC: Fwd/Brk or Fwd/Brk/Rev
Input Power(Cells):2-3S Lipo,4-8 Nicd/NIMH
Brake:Proportional
On Resistance,Brushless:0.001 Ohm Per Phase
Continuous /Burst Current:60 Amp/ 90AMP
Linear BEC:5 Volts, 2 Amp
Input Power(Cells)
2S Lipo:Motor Limits On-road≥9.0T Off-road≥10T
3S Lipo:On-road≥10.0T Off-road≥13T
Thermal Overload Protection:Yes
Dimensions(LXWXH):51.6X30x27.4mm(2.03x1.18x1.08in)
Weight(With wires):78g(2.75oz)
Features of Program Card:
LED Program Card for CS60 60A Brushless Sensored ESC of Sensored Brushless Power System Combo Set.
Simply connect it to the Program Card, you could do ESC programming in a short time and get ready for next run.
Specifications of Program Card:
Cut off voltage: AutoLiPo, None, 5V, 6V, 9V, 12V
Auto-LiPo cut off volts / cell: 3.0V, 3.1V, 3.2V, 3.3V,3.4V,3.5V
Drag brake: 0%, 10%, 20%, 30%,40%,100%
Brakes strength: 0%, 20%, 40%, 60%, 80%, 100%
Punch strength: 0%, 20%, 40%, 60%, 80%, 100%
Reverse type: Proportional Rev.Lock Out, Proportional w/o Reverse, FWD to Brake and Reverse
Motor timing (sensored only): lowest (0°), low (4°), normal (8°),high (16°),highest (30°)
Item size: 80 x 52 x 6mm
Item weight: 20g
Package included:
1 x SKYRC Brushless Motor
1 x 60A Brushless ESC
1 x LED Program Card
1 x Instructions
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!