Description:
This Liquid Water Level Sensor can be used to detect the liquid levle in tank/container or tube/pipe. The thickness of the tube/pipe/tank/container should be less than 10mm.
Non-contact liquid level sensors can only be used in non-metallic containers or pipes such as plastics, glass, and ceramics. It is installed on the outer wall side of the container and does not need to be in direct contact with the liquid to be tested. It will not be corroded by strong acid and alkali liquid, nor by scale. After installation, depending on the thickness of the container, if you need to adjust the detection sensitivity of the sensor, you can open the QC label, fix the sensor on the container or pipe to be tested, adjust the liquid level to the position that needs to be sensed, and then press and hold the small circle. Press the button inside the hole for about 3 seconds until the blue status indicator flashes. At this time, release the button. After the liquid level rises to the position, it can be sensed.
Strong compatibility, through a variety of non-metallic material containers, such as plastic, glass, ceramics and other containers, sensing distance of up to 10mm; liquid, powder, granular objects can be detected. Tiny in size, easy to install.
Features:
Module Name: Non-contact Liquid Level Detection Sensor Switch
Switch Model: WS03M
Working Voltage: DC 5V-24V
Output Voltage(Voh/Hi): Vdd V
Output Voltage(Vol/Lo): 0.5V
Output Current(Iol/Lo): 300mA
Current Consumption: 5mA
Response Time: 0.5 Sec
Working Temperature: 0~60℃
Bracket Type: Type A/Type B/Type C
Module Size: 32mm x 19mm x 10mm
Wire Length: 40CM~70CM
Application: Household appliances products, sanitary wares intelligent control products, drinking & cleaning water and water treatment equipments, medical treatment and foodstuff mechanism equipments, chemical mechanism equipments and so on.
Connection and Diagram:
Packing List:
1pcs x Non-contact Liquid Water Level Sensor Switch