Imperial Multi Gauge - Stainless Steel - Thread & Pitch Identification Gauge

Overview:

Stainless steel multifunction thread/pitch identification gauge. Easily identify the size of bolt, drill bit or tap that is required. Check the thickness of washers and diameter of electric wire. Use as a set square and ruler.

• Stainless steel imperial multifunction thread/pitch identification gauge.
• Pitches: 10, 11, 12, 13, 14, 16, 18, 20, 24, 32, 40 (tpi).
• Bolt Screw Diameters: No.5, No.6, No.8, No.10, No.12, 1/4 Inch, 5/16 Inch, 3/8 Inch, 7/16 Inch, 1/2 Inch, 9/16 Inch, 5/8 Inch, 3/4 Inch.
• Wire Gauge: 0.024 Inch, 0.03 Inch, 0.035 Inch, 0.025 Inch, 0.0312 Inch, 0.0375 Inch, 0.05 Inch, 0.0625 Inch, 0.078 Inch, 0.109 Inch, 0.125 Inch, 0.14 Inch, 0.172 Inch, 0.1875 Inch, 0.203 Inch, 0.234 Inch, 0.25 Inch.
• Square: 15 Degree, 30 Degree, 45 Degree, 60 Degree, 90 Degree.
• Drill Point Angle: 60 Degree, 90 Degree, 118 Degree, 135 Degree.
• Bolt screw length: 0-2-3/8 Inch.
• Tap/Drill Recommendation: #2-3/4 Inch.
• Checks the thickness of washers and diameter of electric wire.

• Net Weight - 137.5g
• Bolt Screw Diameters - No.5, No.6, No.8, No.10, No.12, 1/4 Inch, 5/16 Inch, 3/8 Inch, 7/16 Inch, 1/2 Inch, 9/16 Inch, 5/8 Inch, 3/4 Inch
• Bolt Screw Length - 0-2-3/8 Inch
• Drill Point Angle - 60 Degree, 90 Degree, 118 Degree, 135 Degree
• Pitches - 10, 11, 12, 13, 14, 16, 18, 20, 24, 32, 40 (tpi)
• Square - 15 Degree-30 Degree-45 Degree-60 Degree-90 Degree
• Tap/Drill Recommendation - #2-3/4 Inch
• Wire Gauge - 0.024 Inch, 0.03 Inch, 0.035 Inch, 0.025 Inch, 0.0312 Inch, 0.0375 Inch, 0.05 Inch, 0.0625 Inch, 0.078 Inch, 0.109 Inch, 0.125 Inch, 0.14 Inch, 0.172 Inch, 0.1875 Inch, 0.203 Inch, 0.234 Inch, 0.25 Inch

We sell a wide variety of tools & workshop equipment for both the DIY and Professional markets. With well over 10,000 lines of equipment suiting all jobs big or small, our online store has it all. If you can't quite find what you are looking for, please feel free to contact us and we'll be more than happy to help.