Stator for Honda Motorcycle XR 600 R 1985-2000 OEM Repl. # 31120-MN1-681 / 31120-MN1-671 / 31120-MK2-005

 
KEY FEATURES
 

Brand new aftermarket stator

Direct replacement to your original unit

Highest grade of copper winding resistant to 200 degrees Celsius

Highest grade of lamination materials

All products shipped are tested

DESCRIPTION

 

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket High output Stator 200W

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • 2 x 100W
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Vehicle models fitment
 

Honda XR 600 R -- 1985-2000

OEM part replacement
 

31120-MN1-671
31120-MN1-681
31120-MK2-005

Specifications
 

Dimensions:
Interior diameter: 54 mm
Exterior diameter: 115 mm
Thickness: 15 mm
Length of wires stator to grommet: 200 mm
Length of wires grommet to plug: 700 mm

Other specifications:
Number of wires: 5
Number of plugs: 5
Number of pins: 3
Number of poles: 17
Wire to wire resistance:
Alternator: White to Green = 0.4 ohms +-20%
Alternator: Yellow to Red = 0.4 ohms +-20%
Source: Black/Red to Green = 140 ohms +-20%

instructions
 

Before installing your new Stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".

SHIPPING

 

We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.

Videos